Tips and methods for dyeing fur at home: how to dye a fur coat at home? How to dye faux fur? You can dye your fur with hair dye

Faux fur products are a real find for many fashionistas who have long wanted to acquire fur things, but could not afford to buy them due to the high cost. The modern fur industry has reached an unprecedented level of development, so artificial things sometimes turn out to be no worse than things made from natural fur. Fur coats, bags, interior items, - all this looks just fantastically attractive - and most importantly, it is not so expensive.

However, faux fur is not immune to the loss of its original appearance, so it may often be necessary to restore its color and original appearance.

Staining instructions

So, before you start painting, decide what color you want to paint the canvas. There are a lot of options: you can just correct the color tone of the product by touching it up, or you can decide on more radical experiments - for example, change the color.

The most important question that worries those who are going to dye fur products is how to dye artificial fur. It's simple: most often, hair dye is used for dyeing. If you plan to drastically repaint your fur product, use persistent dyes. To update the color (especially for light colors), it is enough to buy a toning shampoo.

Before you start painting, prepare the surface - remove all traces of grease and dirt, otherwise there is a risk that the paint will not adhere well. As a rule, simple stains are easily cleaned off with a cotton swab dipped in soapy water or shampoo. Do not rush to apply paint right away - try painting on a small piece of canvas (this can be fur on the wrong side or another inconspicuous place). If you are satisfied with the desired result, start painting the entire product.

Secrets of coloring

The dyeing process has its own secrets, having learned which you can thoroughly dye faux fur. First, pull on the faux fur well, otherwise the final result will disappoint you, so it is possible that not all places will be thoroughly dyed. If you radically change the color of the canvas, then paint with a brush so that not only the “hairs” are captured, but also the base fabric itself. Try to follow the instructions as closely as possible if you dyed not fur, but your own hair.

After the entire canvas is painted over, leave the paint to dry for the time specified in the instructions for the paint. Take your time, because the coloring pigments should be well absorbed into the product - this is the only way you will get a perfectly ready-to-wear product that will delight you with its appearance and will last a long time.

The final stage is paint removal. If you see that the paint adheres well to the surface of the product, wash the fur without shampoo, the main thing - do not rub too hard, so as not to damage the structure of the fur. Then comb the garment while still wet and leave to dry. After complete drying, comb the canvas again.

The stereotype that fur products should be exclusively natural colors has long been destroyed. More and more fur display cases are full of models, painted in trendy, most daring colors. Products that combine natural leather and fur have become especially relevant.

For example, leather jackets and blazers with bright fur inserts on collars and pockets are a popular trend now. Clothes such as women's dresses, sweaters, vests are also trimmed with colored fur. Bright fur hats have also won the love of young people.

Unfortunately, dyed fur has one drawback - over time, namely, after 4-5 seasons, it begins to fade and fade. If the product is loved, and you don't want to part with it, then the question comes to mind - is it possible to dye natural fur on your own?

It turns out that it is possible, and even without the risk of damaging an expensive product. It is best to safely refresh the color of the fur with the help of special spray colors from the Salamander company. The spray cans are called Fur-Fresh and come in a range of different shades. In addition to its main purpose, this paint has a number of additional advantages - it returns softness, silkiness and shine to the fur.

It is worth noting that this paint will not radically change the color of the fur; it can only enhance the existing shade or give it a little more depth and saturation. It is better to paint with a spray only collars, hats, and other parts that will not come into contact with the bag, because the paint can leave marks on it with constant contact. To paint a product with this paint, you need to apply it to clean fur, lightly massage and then dry.

There is another way to naturally dye fur at home. For this, ordinary hair dye is used. After all, fur is similar in structure to human hair, and therefore such paint is suitable and safe. To paint a thing for her, you need to remove the entire lining, then lightly process the skins with glycerin, this will prevent them from drying out, and only then start painting. The fur is dyed according to the same principle as the hair, with a brush. It is worth holding the paint as indicated in the instructions. Then the fur is washed and dried.

You just need to take into account three rules:
1. You can dye fur with hair dye only in darker shades, but not lighter than the original tone..
2. When washing off the paint, never wet the leather fabric of the product!
3. Don't try to repaint a new product just because you don't like the color. The described technologies can be applied only to small damaged areas of fur, observing the precautions described in the article.

If you doubt whether you will be able to dye the fur yourself without damaging it, then take the thing to a dry cleaner, where they provide services for various dyes.

In order to refresh the color, toning shampoo is suitable. Earlier, clean the product from dust and dirt with a swab dipped in shampoo. Apply the color composition to a small area to assess the result. Find the right color and spray more than 70 cm away from the product. So that the hairs do not stick together, the can must be constantly moved, and after spraying, immediately comb them with a special brush.

If you want to dye your arctic fox fur in a different color at home, you will need an ordinary hair dye. To get the desired result, you must follow the annotation. For drying, you can use a hair dryer or let it dry naturally. Shine and softness will give the hair balm applied to the surface. Be sure to wash it off painstakingly. So that the entire surface is perfectly painted over, the product must be perfectly pulled and fixed. Brush in the direction of the grain, grabbing the fabric as well.

Withstand the dyeing time indicated in the annotation, and wash the fur well. This must be done carefully, without breaking the villi, gloves should be worn before that. After the period indicated on the package has expired, wash it in warm water with vinegar.

How to paint faux fur with acrylic

To make it soft and shiny, after drying, you can apply the balm that comes with the paint. Carefully wash it off and dry the fur. After such manipulations, the thing will look like new. Often, ladies dye their mink with ordinary hair dye. Before applying the composition, the mink fur must be prepared in the same way as the fox fur.

To facilitate the function, you can use an aerosol or spray bottle. Spray the product at a distance of about 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. We paint artificial fur.

Dye faux fur

Products made from it are very popular due to their own pretty appearance and affordable prices. But over time, the faux fur needs to be dyed. If you want to radically change the color of the product, choose a hair dye of the highest durability. But it is worth keeping in mind that the color will last less than 8-9 months, and later it will start to wash off evenly. To return to its original appearance, the thing will have to be painted again. Can mink products be dyed?

Natural fur is always in fashion. But over time, elegant mink clothes lose their rich color and shine. How to dye fur at home? This is not difficult if you follow the main rules. Spray paint. Owners of things made of arctic fox fur from time to time notice that the tips begin to turn yellow.

To return to the initial look, it is not necessary to paint the entire product, it is enough to use suede paint from an aerosol can. Use a brush to comb the damp lint and let the garment dry. If you know how to dye natural or faux fur, your clothes will always have the freshest and most discreet look. This will prevent deformation of the skin. The fur must be attached with pins on a board, so that during the process of dyeing and drying, the thing does not lose its shape. If the flesh is poorly dyed, it will "shine", creating the effect of the rarest villi. This can be done with hydrogen peroxide.

Only after that it is necessary to apply the coloring composition of the corresponding color scheme. How to apply the paint? Owners of elegant things often think about how to dye natural fur at home.

Preparation. Before proceeding specifically to painting, the fur must be prepared. Carefully clean it from dust and dirt so that the paint will lay down perfectly. You can see how he will "behave" in cooperation with chemical substances. Choose a paint one or two shades darker than the natural color - it will make its color richer. If the thing has turned yellow, it is better not to paint it, but to lighten it. It can be tinted from the inside out.

How to dye the fur inside? You can use a special tool or apply hair dye, having previously tested it on an inconspicuous area. We use hair dye. It is often used to color the Arctic fox. For this purpose, you can use an alkaline solution. For a liter of water, you need to take the following components: approximately 15 grams of salt, two teaspoons of baking soda, 7 ml of detergent, 5 grams of ammonia. Stir all the ingredients to make a homogeneous mass.

Apply it comfortably with a brush. It is quite dense, therefore it is better to purchase two or three packs so that the color comes out saturated and uniform. Before applying the composition to the entire surface, test it on a small piece. We give a fur product a second life - we learn to dye fur at home. Happy owners of fur items know that they fade over time. To return the color, you do not necessarily need to seek help from experts - this can be done at home. Knowing how to dye fur, you will give the product a second life at the lowest cost.

Be sure to rinse off the product. You can use another composition: combine water, vinegar, alcohol in similar proportions. The seamy side, the flesh, also needs to be processed. You need to apply glycerin or fat cream on it. This must be done with brisk, even movements.

How to dye faux fur

Leave the paint for the time indicated on the package. After applying the paint, it must be rubbed over the surface so that there are no bright spots left.

Arctic fox furs, like diamonds, are girls' best friends. Spectacular polar fox coats and coats, original vests are liked by all ladies without exception. They not only warm in the harsh Russian winters, but also look like a king.

Despite the fact that the durability of the arctic fox is very high, its color gradually loses its intensity. Over time, the dyed arctic fox becomes dull, and the white one turns yellow. The good news is that it is quite easy to restore the presentable appearance of arctic fox products with the help of staining. You can resort to the services of an atelier, but it is much more economical to dye the fox fur at home.

Features of self-staining

Furriers believe that, unlike others, the fluffy and dense arctic fox is the most practical to work with. The dyes lay on it evenly and last for a long time. The main thing is to follow exactly the instructions that we have compiled taking into account the recommendations of expert furriers.

An important nuance! Don't paint a new and expensive item at home just to get a different color. Paint products that, if something happens, you will not be sorry: yellowed, faded, out of fashion, etc.

The process of renewing arctic fox fur can be divided into several stages:

preparation;
preliminary cleaning;
painting;
fixing;
drying.

Let's consider each stage in detail.

Preparation

If you want to paint a collar that is sewn on a coat or jacket, you need to carefully unpick it, and after all the manipulations, sew it into place. You need to strip the lining from the fur hats.

As for fur coats, it is quite difficult to paint large things with high quality at home. To do this, you will have to dissolve it into separate skins, and then sew it again. If the fur coat is of value to you, it is better not to risk it. As a last resort, use a tinting spray.

Arctic fox fur cleaning

Existing dirt and greasy deposits must be removed, as they prevent high-quality uniform coloring. If you neglect this advice, then in dirty places the color will turn out paler. A solution of a mixture of the following components will help to clean natural fur at home:

table salt - 2 tbsp. l .;
mild detergent - 1 tbsp. l .;
soda - 2 tbsp. l .;
a few drops of ammonia.

Combine all the ingredients, dilute in two liters of warm water. Treat pre-combed fur with the resulting composition.

Apply it with a brush, being careful to spread it evenly over the entire surface. Aim to clean both the top and bottom of the fur, including the undercoat. Then wipe the lint with a damp sponge several times to rinse off the alkaline solution.

Pet shampoo, which can be purchased at your veterinary store, works well for light dirt. Dilute it with warm water, apply it with a damp sponge and gently clean it. Then wash off the soap with a clean sponge.

The skin on the inside of the fur is called the flesh. Do not wet it at this stage in order to avoid deformation. Lubricate the flesh with glycerin before cleaning to prevent it from getting wet.

Cleaning can be done much faster with professional cleaning sprays such as the FURASOL brand.

How to dye arctic fox fur at home?

It is correct to start dyeing immediately after cleaning, as the dye falls on the damp villi more gently.

Choosing paint

Dyes for natural fur are sold in leather goods, hardware stores or fur stores. If it is difficult to purchase a special dye, we recommend using a regular hair dye of the desired shade. At the same time, the color possibilities expand almost indefinitely.

The pile of the Arctic fox is quite dense. To get a rich color, you need at least two packs of paint.

The basic rule is that fur should be dyed a few shades darker than the existing one. Admirers of colored fur items are advised to pay attention to the fashionable wine, dark blue palette of shades.

Experts note that such dyeing of fur at home will last from 6 to 12 months. Therefore, after one or two seasons, the process will have to be repeated.

Attempt at writing

If you want to dye the fox fur for the first time, then it is advisable to conduct a test for a guaranteed result. This can be done on a small piece or in an inconspicuous place, such as inside pockets or at the hem of a sleeve. Remember to protect your hands with rubber gloves.

If you are satisfied with the result, proceed to dyeing the entire product. It is best to apply the dye composition to the fur with a hairdressing brush. Distribute it, evenly painting over each strand. The holding time may vary, follow the instructions in the package.

After analyzing the reviews of fans of fur dyeing at home, we can conclude that a stable result is obtained when using inexpensive hair dyes. Domestic dye compositions are more variable in color. These paints provide a wide field for experimentation: they can be kept until the desired shade is achieved. Then the paint must be carefully washed off with water at a temperature of 30-40 ° C.

Color pinning

To fix the resulting shade, dilute 5 tablespoons of ordinary 9% table vinegar in 2 liters of water, and rinse the dyed fur in the resulting solution.

If you want to make the fox fur more fluffy and silky, apply a conditioner for colored hair on it. Some manufacturers already have such a balm in the package. Let sit for a few minutes and rinse again with running water. Then blot the garment well with a dry terry towel.

Drying

Remember to periodically brush the pile so that it does not crumple in one direction. A downy cat brush is ideal for brushing.

If you are working with individual skins or a collar, then they should be stretched on a wooden plank and attached with pins before drying. This is done so that the flesh does not shrink after getting wet.

The drying process will be completed when not only the pile, but also the flesh is dry. This usually takes 2-3 days. If you did everything correctly, the item will look like new.

Creative transformation of fur

After practicing with a solid color, experiment and color the fur in a more original way. Let's consider how to get a spectacular leopard print that does not leave the fashion pedestal.

For coloring, you need two types of paint: black and brown. Additionally, you need to make a stencil from thick cardboard. Cut out a pattern of asymmetrical holes in it. Stencil the fur and paint the cut-out areas brown as described above. The next step is to apply black highlights in the center of the brown spots.

If you want to get a spotted color, use hairdressing techniques for highlighting. For example, pre-roll small strands of fur in foil.

Another spectacular option is to paint only the tips of the villi. A rich shade will turn out if you choose a tone lighter than the main one for this.

How to lighten the fur of a fox

This method is great for bleaching yellowed arctic foxes or lightening dark foxes. To do this, you need a hair bleaching compound or simple hydrogen peroxide. When using clarifiers, follow the instructions supplied with them.

Dissolve the peroxide tablets in water, apply the solution to the fur and leave to act for 15 minutes. It is undesirable to withstand more than a quarter of an hour, since the pile can thin and become brittle.

Rinse the product and dry. Then you can tint in the desired shade. You should not lighten the fur of the Arctic fox more than once, otherwise you risk irrevocably spoiling it.

Grandma's recipe

This method was used by our grandmothers to bleach yellowed fur when there were no ready-made paints on sale. Its effect is not based on chemical reactions, but on optical illusion and lasts "until the first snow." Dilute a small amount of blue in warm water, dampen a sponge and lightly rub over the pile. The result will appear after complete drying.

Express method

Specially designed dyes for fur, which are produced in the form of an aerosol, will help you quickly refresh a fur product.

Using such a can is quite simple. Keep it at a distance of 20-25 cm and spray alternately on individual strands. To prevent the pile from sticking together, periodically brush it with a comb.

Manufacturers position such processing as toning. Deep coloring cannot be achieved with this method. It is good when you do not want drastic changes, but want to mask minor defects. For example, yellowed tips or spots. Such a can is also convenient for stencil work. The color range of coloring aerosols is classic: white, black, shades of brown and gray.

How to paint the skin at home?

It happens that the fur is rubbed in places so much that the light skin shines through it. In such cases, its color can also be corrected. When it comes to skin, bald spots can be tinted with leather dyes. Do not forget to grease it with glycerin first. On the finished fur product, it is better to use special markers of the desired shade.

You probably already realized that, with the exception of some details, dyeing the fur of a polar fox is no more difficult than hair. In this case, the same techniques are used: uniform application, exposure, fixing, rinsing with balm.

In addition, you yourself can control the shade using a preliminary test. The color obtained after dyeing in the studio may pleasantly surprise you.

Numerous reviews of the owners of "lively" furs indicate that you can update your winter wardrobe at home. Do not rush to give up on faded or boring things made of arctic fox. Fantasy and skillful hands will prolong the life of expensive clothes and make your friends congratulate you on a new thing. Experiment and enjoy the warmth and beauty of your favorite things!

In the process of long-term wear, a fur product may lose its attractiveness only due to the fact that the fur has faded either from the sun or from exposure to precipitation. In this case, there are two ways of restoration. Specialized enterprises that provide dry cleaning and painting services are able to do it efficiently. But you can give a "second life" to your favorite thing at home. Following the instructions and applying a share of your own imagination, you will be able to create a unique work of art.

If the age of the fur product is indicated by its color, then you can update the appearance with the help of dyeing.

For gray karakul, only black or brown is used. The mink is dyed in its native colors in order to restore the faded shades. Black or brown pigment is suitable for mouton products. Fur things in beige tones are dyed in all shades of brown to enhance the intensity of the native color. Choose a paint one or two shades darker for work.

The main condition for high-quality and uniform dyeing is clean fur. An alkaline solution proved to be the best cleaning agent, its composition is as follows:

soda (dessert spoon);
salt (dessert spoon);
ammonia (teaspoon);
about 15 drops of detergent
1 liter of water.

Lightening yellowed white fur is an additional element of color restoration. To do this, use a solution with hydrogen peroxide (teaspoon) and ammonia (10 drops). This tool can remove yellowness from the fur of the silver fox. In the process of processing with such a composition, deep soaking should be avoided. A preliminary test is made on an inconspicuous area of the product. For clarification, 15 minutes is enough. It must be remembered that b a longer process will make the ends brittle.

Chalk and starch help to remove yellowness on the fur of a gray rabbit for a while. The powder is rubbed evenly and lightly over the upper part of the pile and shaken off. This method will not harm the product, so you can use it frequently. Gray rabbit fur is dyed with hair pigment. There is also an absolutely safe method, in which an aqueous solution of blue is gently applied with a brush to the entire surface of the product. The composition should be light blue.

To ennoble the faded raccoon fur, use a hair dye with a lightening effect, as a result of which the product will look gilded or silvered.

You can update the fox fur with thick potassium permanganate. Treat it gently with a sponge, not allowing things to get wet.

The faded ends of the fur are painted with suede spray paint. Spray the product slowly, keeping a distance of about 70 centimeters between the fur coat and the spray bottle.

How to dye fur with hair dye?

For dyeing a fox or mink on your own, hair dyes are suitable. This method has been tested in practice and always gives positive results when painting not too old things. It is better to check the effect of even high-quality products on a small inconspicuous area of the product.

To dye fur at home, you will need to follow these steps:

Spreading the strands of natural fur, apply a thin layer of greasy cream or glycerin to the flesh.
Gently moisturize the entire fur surface.
Apply the product as carefully as when dyeing your hair.
Leave for a while. Duration of staining - according to the instructions on the package with the dye.
To enhance the effect of the paint, a saline solution is evenly applied to the entire surface.
Wash off the paint under a stream of water from the shower.
The excess is removed with a rag or blotting paper.

After drying, the fur is combed, observing the natural direction of the pile. This paint lasts up to six months on a fur garment, and this is often enough to make the thing look new.

A simplified version of the saturation of the tone is coloring with a toning shampoo (in accordance with the instructions on the package).

For staining with multi-colored paints, homemade stencils are used. The spots are painted alternately.

Faux fur is easier to dye. You can use toning shampoo and hair dye. The sequence of actions is as follows:

Before dyeing, the product is fixed.
The agent is applied in the direction of the fibers.
Leave the paint to soak. The time must match the instructions in the instructions.
After the procedure, the fur is washed, dried and combed.

Experts do not recommend experimenting with coloring new things.

Home or professional dyeing will only slightly extend the life of the fur garment. After a while, the pigment comes off, and the thing becomes faded again.