How easy is it to dye the fur of a polar fox, mink, silver fox, fox at home? We dye natural fur at home Dyeing artificial fur with aniline dyes

Products made of artificial fur (bags, fur coats), visually almost do not differ from natural products, allow you to save money on the purchase. But in the process of exploitation, things inevitably lose their attractiveness, look faded, dull and worn out. The situation is easy to fix if the owner of the item knows how to dye the faux fur at home.

How to choose paint?

Restoring your favorite thing will require a certain amount of time and effort. The choice of paint is the first task that needs to be solved before starting work. To determine the color correctly, it is enough to imagine the product after dyeing and understand how you want to see it. If the owner only plans to return the lost beauty of things, shades that are as close to natural as possible are suitable for him. Whereas a radical change in color implies a careful choice of dye.

Dyeing faux fur is done with standard hair dye. It is important that the mixture is of high quality, provides a stable result and does not spoil the material. Shampoos-tonics will help those who are going to just slightly "refresh" clothes or an accessory without drastically changing their color.

Where to start staining?

Preparation of faux fur for dyeing begins with scrupulous cleaning of the product. Traces of grease and dirt will negatively affect the result, the color will turn out to be uneven, it will not appear completely. Contaminated areas should be treated with soapy water (it is convenient to use cotton wool) the day before the procedure.

After the fur dries, testing is required. It consists in applying paint to a small area located in inconspicuous places. If the resulting color suits you, you can proceed to work with the whole thing. So how to dye faux fur at home?

Dyeing faux fur correctly

To evenly paint over each area, you need to stretch the fur slightly before applying the mixture. For convenience, you can take a wooden board, a chair, use clothespins and similar products.

When diluting paint, it is important to strictly adhere to the instructions; a soft brush will do as an improvised tool. Staining is carried out strictly in the direction of the hairs. To dye the base fabric, light pressure is required on the brush.

After applying the paint, you need to wait until the time has elapsed, information about which is in the instructions. Then the faux fur garment is carefully cleaned (washed with water). It is convenient to remove the dye residues with a clean, damp swab.

You should not wait for the material to dry before combing it, it is done immediately after staining. Next, you need to give the artificial fur time to dry completely and again walk over it with a comb, giving the fibers the necessary position. Now you can admire the achieved result - the thing again began to look “like from a store”.

It's important to know

Stretching is maintained until the product is completely dry, otherwise a change in its size is inevitable. The thing is capable of not only shrinking, but also ugly stretching, as a result of which it will look even worse than before work. It is far from always possible to achieve the desired color at the first staining (especially in the absence of experience). In this case, it is allowed to re-subject the artificial fur to this procedure. It is only important that at least 10 days have passed since the first attempt.

It is also necessary to understand that the result depends on the degree of deterioration. Unfortunately, not all products that have been in use for a long time are subject to rehabilitation.

Have you ever thought about how to dye fur at home? But surely every modern woman of fashion has a vest, a sheepskin coat or a fur coat made of natural or artificial fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or maybe you will come up with an idea to change the appearance of an old thing. Today, organizations of the service sector, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet the expectations of customers. That is why the question of how to dye fur at home, is it possible, in general, to carry out this procedure on your own, today is very common. We will talk about him within the framework of this material.

Preparatory activities

The success of the "operation" largely depends on how well the preparatory measures are carried out. Having decided to update the shade of the fur or radically change it, do not forget to clean it, because the dirt prevents the deep penetration of the dye, and accordingly affects the result of dyeing.

For cleaning, you will need an alkaline solution made from a liter of water, 2 teaspoons of baking soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, a greasy cream, for example, a baby cream, should be applied to the flesh (the bottom layer of the skin). Then, armed with a brush with stiff bristles, apply an alkaline solution to the fur, distributing it over the entire surface, then thoroughly rinse the product under running water and put it in a horizontal position to dry.

How to paint?

If you do not know how to dye fur at home, what means to use for this, you have come to the right place. To date, there are enough professional paints and compositions in specialized stores, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing, you need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to the option with stiff bristles.

Arctic fox fur

How to dye arctic fox fur at home? Luxurious vests made of arctic fox skins have been a trend of the last few years. They will be relevant in the near future, which is why the owners of such a luxury need to properly care for it: update the shade of fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take this opportunity?

Determining the shade

If you do not know how to dye natural fur at home, in particular, fox fur, it is important to get acquainted with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing the fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Getting started staining

For maximum results, moisten the fox fur with water, then start applying the coloring composition, paying attention to each area. After the entire composition is applied, it is necessary to withstand the time indicated on the package. After that, it is enough to rinse the product under running water and dry it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural natural shade, and will last much longer than budget counterparts. But some recommend using spray paints. In this case, it is necessary to apply paint from a distance of 60-70 cm in several layers. Do not be afraid to layering paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use the general rules that work with any fur. In all, the dyeing procedure completely repeats the procedure for transforming the fox fur described above.

Mouton fur

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made of muton fur gives. But not everyone knows how to properly care for fur, which is why, over time, it becomes necessary for additional dyeing.

Mouton products are rightfully one of the most unpretentious, but speaking of dyeing, you should be patient, be extremely careful and accurate. So how to dye fur at home with paint in the case of muton. The pile of such fur is quite thick, dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small area of the fur product - in case of spots and bald spots, it is better to abandon the idea of self-dyeing and entrust it to professionals.

Artificial fur

Do you think only natural fur is admired and admired by those around you? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have turned the whole idea of fashion, beauty and luxury upside down. If you have a jacket or bag made of this material in your wardrobe, update it with dyeing. Would you like to know how to dye faux fur at home? We will tell you about it.

For dyeing, all the same hair dye is suitable - in the case of artificial fur, you can experiment, give preference to brighter, acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get the perfect result, before dyeing, do not just lay out the product in a horizontal position, but also stretch it well. This will help prevent the formation of bald spots.

Summing up

We tried to figure out how to dye fur at home, and gave several of the most effective ways. With the proper approach to the procedure, using quality materials and tools, you can achieve an amazing result. In addition, dyeing fur, both natural and artificial, at home will not take much of your time and, most importantly, money. We hope that you will appreciate the information provided and be sure to use our advice and recommendations.

Fur coats, vests, hats made from natural fur of a rabbit, arctic fox, silver fox or mink are expensive things that we have been wearing for several years. But over time, the fur product begins to lose its original attractiveness: some places are rubbed, the color fades ... And then we ask ourselves, is it possible to dye the fur at home? Indeed, how else can you extend the service life of your favorite fur coat? Let's say right away: this is possible, but such a procedure will take a long time. Dyeing a fur product requires special care, and the process itself takes place in several stages.

Preparation of the product for staining

Before dyeing the fur at home, it needs to be cleaned of dirt and grease particles. If this is not done, the paint may be poorly absorbed and stains and streaks will remain on the fur. An alkaline solution is prepared for cleaning. For 1 liter of water you will need:

1 teaspoon dishwashing liquid or laundry detergent
5 g of ammonia;
15 g salt;
10 g of baking soda.

The resulting liquid must be evenly applied to the entire area of the fur with a brush, and then thoroughly rinsed under running water. If you don't have ammonia or baking soda at home, you can make a solution of alcohol, vinegar, and water. All ingredients must be taken in equal parts. Such folk cleaning products will be effective for different types of fur - polar fox, silver fox, rabbit and mink. It is better to lubricate the skin on the back with a greasy hand cream to prevent drying out.

Dyeing

Natural fur is very similar in structure to human hair, which is why it is more efficient and convenient to use hair dye from any supermarket or household chemicals store. Use a good permanent paint for long lasting results. Pay attention to the texture of the fur. The fur of the arctic fox and mink has a dense pile, unlike the rabbit and silver fox, so two packs may be required at once.

Before dyeing a fur product, you need to try the paint on a small piece of the product. This will help make sure that the dye lays down evenly and the desired shade is obtained. Apply the paint with a brush and then spread the mixture by hand. It takes the dye to withstand as long as indicated in the instructions for use. Then the item is thoroughly washed in warm water and left to dry. The use of fans and hair dryers is not recommended.

It is better to paint in shades darker than the base color. If you do the opposite, you can get an unexpected color, for example, when dyed in blond, mink fur may turn slightly yellow. The most pliable in this case is the white rabbit fur. It does not need to be discolored and it is easy to give it any color (pink, red, black, ash). But you need to remember that rabbit fur is a very delicate material and you need to carry out any manipulations with it with special delicacy. If you still doubt that you can color the fur yourself at home, it is better to contact a specialized workshop.

After you have managed to repaint the fur product, you need to take care of preserving the result. In order for the paint to adhere well, before drying, the product is placed for a while in warm water with vinegar. Nourishing hair balms will help give the fur of a rabbit, mink or arctic fox shine and silkiness. Apply the product diluted with water to the dry item with a brush, hold for a few minutes and rinse well.

Fur dyeing is not such a time-consuming process as it might seem at first glance. The main thing is to choose the color correctly and follow the sequence of actions. Get expensive, permanent paint. Then the "new thing" will delight you for more than one year.

The fur will fade in the sun. Precipitation also affects its brightness. As a result, even the most expensive and high-quality fur coat begins to look shabby and old over time. Painting will help get rid of signs of wear.

First, clean the fur: comb it, remove dust and other small debris. If you do not do this, foreign particles will not allow the paint to lie down evenly. Then choose the tool you will work with. Remember that even the most persistent options will only support a given color for 1 season. By the beginning of the next one, there will be no trace of painting.

How can you dye your fur?

Most often, housewives turn to either professional dye products designed for use on fur products, or to ordinary hair dye. The latter will have to be purchased in large quantities. Especially if the pile is long, thick, and the fur coat does not belong to the shortened models.

Also definitely worth a compatibility test... Apply the purchased dye to an inconspicuous area of the fur. Withstand the allotted time. Rinse it off. Wait a couple of days. If during this period nothing terrible happens to the thing and the resulting shade suits you, proceed to a full-scale painting.

What do you need to work?

List of items and materials that will be needed in the process:

salt, soda;
glycerin, ammonia;
specialized means for washing fur clothes;
water.

Self-painting algorithm

So, it is necessary:

Before applying some types of paint, you will have to wet the fur. Just spray some water from a spray bottle.

Important nuances

During application, try to paint over all areas, do not miss anything, but move quickly. Otherwise, one part of the product will be painted over better than the other. This will be due to the varying duration of exposure to the pigments. If there are problems with the speed of completing tasks or there is no experience, it is worth resorting to a spray bottle... Just don't put it too close to your wardrobe item. It is necessary to spray from a distance (about 50 cm).

Important! If you use specialized paint sold in spray cans, it should be sprayed from a distance of 60–70 cm.

At the end of the application, let the paint stand for the prescribed time. The waiting time depends on the active coloring agents, but usually the instructions say about 30-45 minutes. After the allotted time, rinse the coat in vinegar solution and blot the nap with paper towels. This will remove paint residues.

It is forbidden to squeeze, twist, drive over the product with sponges or undertake other manipulations aimed at speedy drying. For this purpose, you can only use napkins.

The next step is optional, but recommended. Experienced housewives advise apply a mask for colored hair to the undercoat immediately after removing the remaining dye... Professional products are best suited that not only protect the color from washing off, but also take care of the hair structure. Their effect will be noticeable in 2–5 minutes. After this time, rinse the garment again.

How to dry properly?

After all the work, the fur coat is placed on wide hangers, ideally suited in size. It is also worth paying attention to what material the thing is made of. Thin steel simply will not withstand and will bend from the weight of a raw fur coat, if it is, say, mink or sable fur. That is, there is no point in being guided by the fact that the hanger has never been deformed under a fur garment before, because up to this point the outerwear has always been dry.

The best option: durable wooden hanger... Place them together with the worn sheepskin coat in a warm room. Try to make sure that the heaters, if they are working, are as far away from the fur as possible. If you don't have a good coat hanger, you can try another drying method.

Algorithm of actions:

let the water drain;
apply glycerin and set the direction of the pile, if necessary;
fold in half;
place on a hard, flat surface (the fur should be on top);
put a well-absorbent cloth;
periodically change the absorbent cloth to dry.

First, you will have to do this every 1.5-2 hours, then the duration of the break will begin to increase. In general, drying a fur coat takes from 3 to 5 days. During this time, experts recommend combing the product and inspecting its undercoat for strange changes.

In the event of bald spots, deformation and other defects, immediately seek help from a dry cleaner. Perhaps the fur can still be saved.

Natural fur products will never go out of fashion. And all because they are not only warm and comfortable, but also expensive and stylish. A real fur coat or vest made of arctic fox fur is an indicator of wealth and high taste. But what to do if the fur has deteriorated from old age, has become faded or dull. Or you accidentally stained the product, but you cannot get rid of the stain. In this case, you just need to repaint the fur and breathe new life into the clothes. Indeed, the painted arctic fox looks in a new way, as if you have pampered yourself with another expensive purchase.

We clean the fur before painting

In order for the paint to lay down evenly, to completely dye the fur and not to leave pale areas, the product needs to be cleaned. To do this, prepare a solution from the following ingredients:

2 tablespoons of salt;
a tablespoon of ammonia;
2 tablespoons of baking soda
a tablespoon of powder;
2 liters of warm (not hot) water.

Mix all the ingredients and gently apply the mixture to the fur. Brush over the fur. Make sure that not only the top, but also the bottom of the fur is cleaned. After this, wipe the fur several times with a clean damp cloth to wash off the soap composition from it. The skin on the back is called the flesh. If possible, it does not need to be wetted, otherwise it may shrink.

Dry fur naturally - no hair dryer or heater. Do not leave fur in direct sunlight. It is best to hang your fur coat or collar on a hanger and leave it in a well-ventilated place.

As you know, fur can be dyed in special workshops. But the price of such a service is quite high, and besides, you will get an unexpected result. If you dye the fur of a polar fox at home, you can independently control the process and, if necessary, influence it. So how do you transform a fur product?

First you need to choose a paint. You can find specialty dyes for fur in hardware stores. It is designed for a similar structure of wool and fits perfectly on the villi. If you have not found such a paint, you can use an ordinary hair dye. Here you have a wide palette - from black to reddish chestnut. It is important to consider that you need to dye fur in darker colors (relative to the native shade). Keep in mind that over time, the red color of the fur will turn rusty or red, and the black will take on a dirty brown.
Dilute the paint according to the instructions. To do this, carefully observe all proportions and water temperature. Wear gloves and a respirator - inhaling paint vapors is quite harmful.
Lubricate the flesh with a fat baby cream, glycerin or petroleum jelly. This will protect the skin from drying out and also prevent it from getting too wet.
You can paint a fur coat both dry and wet. Therefore, painting usually follows cleaning of the product - wet pile helps the paint to lay down more smoothly. Take an ordinary brush used by hairdressers to dye strands and apply the paint to the fur. This should be done quickly, but carefully. Paint over all areas so that there are no light clumps left.
To give the fur a special color, you can paint the product with several colors using a stencil. To do this, take a thick piece of cardboard and cut out small asymmetrical holes on it. Apply the resulting stencil to the fur and color the fur in certain areas brown. The next step is to paint the center of the brown spots with black. This will give you a bright leopard print.
The fur can be dyed not completely, but only its ends. This will give you a rich and rich hue. Most often, the ends of the villi are made lighter.
A great way to freshen up a piece is to paint the ends of the hairs with a special suede paint, which is sold as an aerosol. Keep the can at a sufficiently large distance, move evenly. It is much easier and faster than classic fur dyeing.
After that, leave the fur for the time indicated on the paint package. Usually 30 minutes is enough to get the desired shade.
Rinse the fur thoroughly so that no paint remains on it.
Dissolve five tablespoons of vinegar in a couple of liters of cool water. Rinse the product in this solution. The vinegar will help keep the softness and shine, and also strengthen the color. Then blot the fur with a dry towel.
To prevent the Arctic fox from shrinking during drying, the flesh must be stretched. To do this, hook the edges of the product with clothespins and stretch them on the table. This will prevent deformation.

You need to dry the fur in a ventilated area, you can on the balcony. Never dry the Arctic fox in the sun, near a radiator or with a hair dryer. Brush the fur periodically so that it does not dry out randomly.

How to dye arctic fox fur in a light shade

If the natural fur of the arctic fox is already dark enough, and you do not want to dye it in a more saturated shade, it should first be discolored. This can be done with a special hair bleach or simple hydrogen peroxide.

Dilute the lightening paint according to the instructions. If using hydrogen peroxide, dilute it with water in a 1: 3 ratio. Apply the prepared product to the fur and leave for 10-15 minutes. It is not recommended to keep the brightening composition for a long time, otherwise the villi may become brittle. In this case, you run the risk of being left without fur at all. Then rinse the fur and leave to dry. It is possible to dye the fur after lightening only after the product has completely dried. It is not necessary to lighten and dye the fur several times. One time will be enough, otherwise you can irreparably spoil the structure of the villi.

Take your time to give up a boring or spoiled fur thing. Savvy, imagination and a competent approach will allow you to update your winter products. Shine and change without changing yourself!