How to dye faux fur at home? We paint Eco-fur: resuscitation by professional and folk methods How to paint a short fur coat at home

The stereotype that fur products should be exclusively natural colors has long been destroyed. More and more fur display cases are full of models, painted in trendy, most daring colors. Products that combine natural leather and fur have become especially relevant.

For example, leather jackets and blazers with bright fur inserts on collars and pockets are a popular trend now. Clothes such as women's dresses, sweaters, vests are also trimmed with colored fur. Bright fur hats have also won the love of young people.

Unfortunately, dyed fur has one drawback - over time, namely, after 4-5 seasons, it begins to fade and fade. If the product is loved, and you don't want to part with it, then the question comes to mind - is it possible to dye natural fur on your own?

It turns out that it is possible, and even without the risk of damaging an expensive product. It is best to safely refresh the color of the fur with the help of special spray colors from the Salamander company. The spray cans are called Fur-Fresh and come in a range of different shades. In addition to the main purpose, this paint has a number of additional advantages - it returns softness, silkiness and shine to the fur.

It is worth noting that it will not work to radically change the color of the fur with this paint; it can only enhance the existing shade or give it a little more depth and saturation. It is better to paint with a spray only collars, hats, and other parts that will not come into contact with the bag, because the paint can leave marks on it with constant contact. To paint a product with this paint, you need to apply it to clean fur, lightly massage and then dry.

There is another way to naturally dye fur at home. For this, ordinary hair dye is used. After all, fur is similar in structure to human hair, and therefore such paint is suitable and safe. To paint a thing for her, you need to remove the entire lining, then lightly process the skins with glycerin, this will prevent them from drying out, and only then start painting. The fur is dyed according to the same principle as the hair, with a brush. It is worth holding the paint as indicated in the instructions. Then the fur is washed and dried.

You just need to take into account three rules:
1. You can dye fur with hair dye only in darker shades, but not lighter than the original tone..
2. When washing off the paint, never wet the leather fabric of the product!
3. Don't try to repaint a new piece just because you don't like the color. The described technologies can be applied only to small damaged areas of fur, observing the precautions described in the article.

If you doubt whether you will be able to dye the fur yourself without damaging it, then take the thing to a dry cleaner, where they provide services for various dyes.

Reading time: 7 minutes

The fur coat already looks worn, but it is still a pity to throw it away. To improve its appearance, you can paint it. With a detailed study of the information, this process will not be difficult. How to dye the fur, what is needed for this, how to prepare, is described below.

Before painting, the product must be prepared. How can you clean the fur:

a teaspoon of dishware;
2 teaspoons of salt
10 g of soda;
5 g of ammonia;
litere of water.

A homogeneous liquid is made from the components. Clothes are hung on a hanger or placed on a table. Spread the cleanser with a brush, leave for a few minutes. Rinse off with running water so that it does not fall on the lower part.

What else is suitable for cleaning:

mix water, vinegar, alcohol in equal proportions;
distribute over the product, rinse.

After the item is dried outside or in a ventilated room. Do not hang next to the stove, battery.

These methods are suitable for cleaning mink, rabbit, silver fox, arctic fox fur - any natural fur.

Cleaning is necessary for even application of paint. Dirt, dust will not allow you to do this.

The leather part of the garment is treated with regular hand cream. It will not dry out, will not crack.

Fur varieties

Useful tips for dyeing fur, depending on the type:

White wool is the easiest to dye. Chinchilla, rabbit fur coat is easy to dye. This is done carefully so as not to damage the delicate fur. If the white villi turn yellow, they are lightened with hydrogen peroxide. Then any color will fall flat.
The hairs of the arctic fox are dense, it will take a lot of time and paint on them. It is easier to work with a fox, the paint is easy to apply, the color remains for a long time.
Dyeing a mink coat is not easy. It is difficult to stain.

A thing made from nutria is easier to paint than mink. It looks like a mink, but lighter. She has three types of hair in thickness and length, so the fur is tight.
The dyed muskrat turns out to be pinkish with white spots. After a short time, it fades.
The hair of a sheared beaver cannot be lightened beautifully. It will turn yellow. It is worth using darker paints for the original color.
It is not easy to dye a mouton coat due to its high density. It is necessary to carefully distribute the dye, carefully monitor the uniformity of the application. Otherwise stains will result.
When dyeing silver fox fur, a new color is usually given to the longest villi.

Do not use hair dye on artificial fur. Aggressive substances will spoil it.

Do not paint a new product, this will shorten its service life. Only an old, worn-out thing is subject to this process in order to serve its mistress a little more.

Before painting, check the readiness of the skin. A little lining is stripped off and the skin is moistened with plenty of water. If you pull it hard and it breaks, then you cannot paint, otherwise the finished thing will fall apart. If it stretches, painting is allowed.

Where do they paint

Where can I paint a fur coat or fur thing:

In an atelier specializing in fur processing. There they will both fix and paint.
Some dry cleaners have a fur dyeing service.
They paint in factories, but usually in large batches. If you wish, you can find a company to paint your fur coat.
At home, it is not difficult to do it with your own hands.

Dyeing process

hair dye;
tint shampoo / balm;
spray paint for suede;
sprays-dyes for fur;
clarifier.

Bleaching products damage the hairs. After clarification, the fur coat will last less than originally planned. It is worth considering whether cardinal changes are needed or whether it is worth painting in a darker color.

Applying hair dye

Animal hair and human hair are similar in structure. This product is ideal for dyeing fur. Before using it, it is worth checking the action on a small inconspicuous area of the thing. If necessary, the yellowness is removed from the clothes first. After that, they begin to stain. A good quality ammonia paint is recommended.

How to use hair dye correctly:

Wear gloves. Dilute the product according to the instructions.
Apply to the product with uniform, quick movements. Rub all over the fur - no stains should remain. Movement should be careful so that the hairs do not break.

After staining, the skin is again lubricated with cream. The thing is blotted with a towel, dried. To prevent the clothes from shrinking, they are pinned to a hard surface with the fur up.

One procedure is not enough for painting in black. This is done 2-3 times.

You should not do complex dyeing, highlighting wool on your own. Such work should be entrusted to professionals. If you have experience with hair coloring in this way, you can try:

apply paint to the ends;
wrap with foil, leave for the required time;
wash off gently.

If you paint a natural fur coat at home correctly, it will last a long time. The color will begin to fade in 7-9 months. After this time, it is recommended to refresh the color.

Spray can

The suede product is suitable for coloring parts of the garment. The ends of arctic fox fur can turn yellow over time. How to spray paint your fur:

spray at a distance of 70 cm from the thing;
move the spray all the time so as not to glue the hairs;
comb after spraying, then they will not stick together.

There is a special paint for natural fur in the form of an aerosol. A small area is dyed with it, for example, a fur collar. This part should not come into contact with the bag, the constant interaction will leave a mark. How to do:

sprinkle the required area on a jacket or fur coat;
massage for distribution;
dry naturally.

Spray will not be able to paint in a different color radically. You can enhance the shade, make it richer and deeper.

Other options

You can repaint fur things in the following ways:

The yellowed mink hat is lightened with the following composition: combine a couple of tablespoons of hydrogen peroxide and 10 drops of ammonia. Moisten the ends of the villi so that the liquid does not get on the skin.
To paint a red fur coat will turn out with a manganese solution. It must be concentrated. Apply the solution with a new dish sponge and make sure that the skin does not get wet.
Toning with a tint shampoo will help make the color deeper, richer. This is true if a fur coat, hat or vest was previously painted with hair dye. The tinting agent maintains the color to delay the time of the next hair dyeing.

To soften the old fur coat and give it shine, you should use a hair balm. This is done after staining or mixed with a tinting agent. Finish the staining by rinsing in vinegar solution.
Rabbit fur is dyed at home only in extreme cases with delicate dyes. He is very delicate, delicate.
The fur inserts on the coat are dyed carefully so as not to stain the main material. If the fabric allows it, sew a piece of fabric onto the main part in a few stitches. You can wrap it with a piece of unnecessary fabric, secure it with a pin.

How to dye faux fur with your own hands:

get rid of dirt and dust with a cotton pad with shampoo, rinse with water;
use a toning shampoo to update the color;
use dye for faux fur, but not for hair;
for an even distribution of color, the thing is pulled, fixed;
brush along the fibers, without missing the fabric;
after the required time has elapsed, they are washed, combed the fur, and left to dry.

How to care

Proper care for color preservation, novelty:

sometimes comb the hairs with a special brush;
dry clothes if it's snowing outside;
clean contaminated, worn-out areas in time;
before putting away for storage, get rid of stains, dust;
put on a cover for storage after winter.

Dyeing a fur product is not difficult if you approach the process correctly and follow all the instructions. If the thing is badly damaged, you need to paint the whole fur coat or there is a fear that it will not work out, it is better to contact the studio.

Let's say your the coat faded or you just got bored. Or maybe you just want to give your fur clothes a fancy, unusual look? Or made a fur one? Don't you want to go to the dry-cleaner to dye your fur? At home, try doing this by reading our tips.

DIY fur dyeing

Usually, fur is dyed in dark colors - black, brown or dark brown. Because then the defects in the fur will be less visible. In addition, this is the basic rule for dyeing fur - you can only dye a darker color.

Don't worry - this procedure is no more complicated than

All fur dyeing operations are done only in special longboats stainless steel or plastic barrels. There are two main methods for dyeing fur:

Dyeing with oxidative dyes and dyeing with acid dyes.
Toning.

The first method is the most common. Firstly, it is cheaper, and secondly, the fur is dyed in this way at lower temperatures. Fur dyed with oxidative dyes has a higher luster when compared to fur after acid dyeing.

Specials have now appeared in stores coloring sprays fur products. But you should know that such a method will inevitably color everything that the fur touches. Below you will see a video where the craftswoman did a great job with hair dye.

Important:

Before dyeing the fur with your own hands, you need to check sagging of skins on the welding temperature. Old skin may simply not withstand painting and fall apart during painting. The quality of fur dyeing largely depends on the ability of dyes to penetrate deep into the hair. The dye solution does not penetrate well into the structure of oily and dirty hair. This requires killing the skin.

The fur will fade in the sun. Precipitation also affects its brightness. As a result, even the most expensive and high-quality fur coat begins to look shabby and old over time. Painting will help get rid of signs of wear.

First, clean the fur: comb it, remove dust and other small debris. If you do not do this, foreign particles will not allow the paint to lie down evenly. Then choose the tool you will work with. Remember that even the most persistent options will only support a given color for 1 season. By the beginning of the next one, there will be no trace of painting.

How can you dye your fur?

Most often, housewives turn to either professional dye products designed for use on fur products, or to ordinary hair dye. The latter will have to be purchased in large quantities. Especially if the pile is long, thick, and the fur coat does not belong to the shortened models.

Also definitely worth a compatibility test... Apply the purchased dye to an inconspicuous area of the fur. Withstand the allotted time. Rinse it off. Wait a couple of days. If during this period nothing terrible happens to the thing and the resulting shade suits you, proceed to a full-scale painting.

What do you need to work?

List of items and materials that will be needed in the process:

salt, soda;
glycerin, ammonia;
specialized means for washing fur clothes;
water.

Self-painting algorithm

So, it is necessary:

Before applying some types of paint, you will have to wet the fur. Just spray some water from a spray bottle.

Important nuances

During application, try to paint over all areas, do not miss anything, but move quickly. Otherwise, one part of the product will be painted over better than the other. This will be due to the varying duration of exposure to the pigments. If there are problems with the speed of completing tasks or there is no experience, it is worth resorting to a spray bottle... Just don't put it too close to your wardrobe item. It is necessary to spray from a distance (about 50 cm).

Important! If you use specialized paint sold in spray cans, it should be sprayed from a distance of 60–70 cm.

At the end of the application, let the paint stand for the prescribed time. The waiting time depends on the active coloring agents, but usually the instructions say about 30-45 minutes. After the allotted time, rinse the coat in vinegar solution and blot the nap with paper towels. This will remove paint residues.

It is forbidden to squeeze, twist, drive over the product with sponges or undertake other manipulations aimed at speedy drying. For this purpose, you can only use napkins.

The next step is optional, but recommended. Experienced housewives advise apply a mask for colored hair to the undercoat immediately after removing the remaining dye... Best suited professional products that not only protect the color from washing off, but also take care of the structure of the hair. Their effect will be noticeable in 2–5 minutes. After this time, rinse the garment again.

How to dry properly?

After all the work, the fur coat is placed on wide hangers, ideally suited in size. It is also worth paying attention to what material the thing is made of. Thin steel simply will not withstand and will bend from the weight of a raw fur coat, if it is, say, mink or sable fur. That is, there is no point in being guided by the fact that the hanger has never been deformed under a fur garment before, because up to this point the outerwear has always been dry.

The best option: durable wooden hanger... Place them together with the worn sheepskin coat in a warm room. Try to make sure that the heaters, if they are working, are as far away from the fur as possible. If you don't have a good coat hanger, you can try another drying method.

Algorithm of actions:

let the water drain;
apply glycerin and set the direction of the pile, if necessary;
fold in half;
place on a hard, flat surface (the fur should be on top);
put a well-absorbent cloth;
periodically change the absorbent cloth to dry.

First, you will have to do this every 1.5-2 hours, then the duration of the break will begin to increase. In general, drying a fur coat takes from 3 to 5 days. During this time, experts recommend combing the product and inspecting its undercoat for strange changes.

In the event of bald spots, deformation and other defects, immediately seek help from a dry cleaner. Perhaps the fur can still be saved.

When a woman is puzzled by a question "How to update faux fur" this means one of two things: I want to return a decent look to a fur coat (or purse) and carry on with a refreshed little thing; or paint and cut nafig into pieces for needlework. Well, both options have a right to exist). To implement the first one, it is enough to wash Eco-fur. The second one is a little more difficult, but I will try to help you dye Eco-fur quickly and easily. This will be discussed below.

We paint and wear)

Have patience, be careful and careful, follow the paint manufacturer's instructions and as a result, you will receive a fashionable updated wardrobe item right at home.

We paint artificial fur. Preparatory stage.

In order for the product to receive an even color, it must be clean and dry... If it is a small item, such as a bag or a hat, wash the entire product () about 24 hours before dyeing. If washing is not possible or if it is an oversized fur coat or jacket, simply dry clean. All dirt and grease must be removed without fail. The item should be completely dry by the time of painting.
The seamy tissue side of the "subject" smear with fat cream(for hands or face) or glycerin. The fabric will become softer and more elastic to prevent possible tears.
So that the thing does not sit down, does not stretch and be painted over evenly, it must secure to a table, wooden cutting board or chair(depending on the size), having previously covered them with a thick film. Can be purchased at garden shops or home improvement stores. Use clothespins, clothespins, or buttons. If you have done the previous step with smearing the wrong side, there is no need to fear.

You need to prepare not only the thing, but also yourself.

Wear clothes that you do not mind getting dirty, remove your hair, wear gloves, if the smell of paint is pungent, use a respirator.
Cover the floor with oilcloth or newspapers in places where you can accidentally drip paint.
Drive pets out of the room, ask your pets not to bother you.
Prepare the tools you need: flat wide synthetic brushes, a container for paint (not metal!), sponges, rags, a flat comb or a clothes brush.

What dyes are needed for Eco-fur?

To choose the right staining method, you need to know what your fur coat is made of. There are different paints for different compositions. The information must be indicated on the manufacturer's label. Most often it is acrylic and / or polyester.

If you want to paint a thing once and for all, then use these methods.

Hair dye

The most popular way is staining with it. She easily takes any kind of fur... This is no harder to do than your own hair.

Choose a brand to your taste

The only difference is that it is more convenient (you cannot take your head off and put it on the table) and more difficult due to the amount of work. Otherwise, everything is as usual.

If you want to repaint, completely after changing the color, choose colors that are brighter and darker than the current color of the product.
If you just tinted or just freshen up the color - look for tinted persistent paints that are close to the tone of your thing.
Necessarily buy a good, high quality paint... Test by painting a small patch on an inconspicuous spot or similar material. If the color suits you, go ahead).
Dilute the paint according to instructions Then, carefully, paint the fur layer by layer. Run the brush along the bristle, pressing lightly to reach the base... It also needs to be painted.
Leave the product for the required amount of time for the pigment to fix in the fibers.
Then rinse off the paint and dry the fur. Here is a detailed video about how to dye fur at home... It is with the participation of natural fur in the main role, but with the same success it can be replaced with eco-fur)

The plus is that you will know the color for sure(it is on the package) and this is a common procedure for many women.

Cold batik or acrylic paints in alcohol solution.

The composition is simple: 70% vodka, 30% water and as much paint as you want it to be. Soak the fur in the resulting solution for 10-15 minutes under pressure. You need to constantly check the color... When he triples you, rinse with the addition of vinegar to the water.

The intensity of the color depends on the amount of dye and the holding time

Special paints for synthetics.

Just follow the instructions on the package.
It is important that the composition of the base and villi of your fur coat is included in the list of allowed for painting, otherwise you can ruin everything. note that paints must be suitable for water 40 ° C, maximum 50 ° С, synthetics cannot be processed in hot solutions! If you did not find paints suitable for these conditions, use other methods, for example, folk ones.

Folk methods of permanent staining of Ekomekh. Fukortsin, Zelenka and Iodine.

I came across information that craftsmen dye artificial fur with the drugstore "Fukortsin" in order to get pink or burgundy shades depending on the concentration of the solution... It is a dark red antiseptic liquid for external use. They write that the color holds well, does not wash off.

Water no warmer than 40 ° C is collected in a large container, like a basin, so that the product does not deform.
Next, pour the required amount of Fukortsin into the water from a consumption of about 1 jar per liter of water.
Fully we immerse the product in a bowl with a coloring liquid, and put oppression on top, which is not a pity, so that every hair of the product is in solution. Check the color every 5-10 minutes... When it suits you completely, take out the thing and begin to gently rinse it out in a large amount of water at room temperature. To fix the color during the last rinses, add a tablespoon of 6% or 9% vinegar to the water.

Fukortsin takes anything and almost instantly, so the intensity of the color is directly related to the time spent in the basin. After about 1 minute, it will be pale pink from white, after 5 - pale fuchsia, after 15 - red, and so on.

It is interesting that if you add brilliant green to the Fukortsin solution (about 0.5 tsp per liter of water, again "to taste"), then you can "take away" the color from the red in lilac and even purple shades... And if you use only brilliant green or only Iodine, you can achieve emerald and yellow-brown shades, respectively.

A little Yoda and white will turn into ecru)

A lot of brilliant green and a stylish fur coat is ready)

Before painting, I would conducted color tests, at least on a white cloth (cut into small pieces) of the same composition as the thing to be painted.

Due to the "corrosiveness" of the dye, use a basin, tools, gloves, containers, who are not sorry, because they will also be colored.

pros such coloring are obvious: this cheap and sold in any pharmacy... You can control the saturation and hue of the color yourself. These products can be mixed for amazingly beautiful shades.

But there is also minuses: There were complaints in the reviews about uneven coloration... I think it depends on the fabric - since and, perhaps, the thing was not completely in the water and therefore painted over with stains and gaps. I strongly recommend making experimental dyes on fabrics of similar composition.

The advantages of these paints are that it Once and for all- painted once and forgot. You don't have to be afraid to get caught in the rain - nothing will flow or smear.

Temporary staining - toning.

As for the "professional" means - these are tint tonics and shampoos for hair... Everything is done in the same way as with hair dye.

The popular way is blue staining.

It must be chosen carefully. Good blue does not stain or fade, otherwise, it is better not to go out in the rain in such a product. The instruction is the same as for Fukorsin with Zelenka: soak in a dye diluted with water, constantly controlling the color.

The final stage of all procedures is rinsing, applying balm and drying.

Remove the retaining buttons and clothespins.
Use large amount of water to rinse out any unwanted dye residues. Remember to add some vinegar to set the color and shine of the fur.
If the product is not allowed to wash, stock up on sponges and without removing the clamps, begin to gently rinse off the paint from the fixed product. It will take time, but it will be worth it.
Apply balm or hair conditioner to the fur, massage it in and let it sit for 3 minutes.
Wash the fur thoroughly. Do it with gentle blotting movements avoiding friction of the villi.
Fur is not squeezed or twisted! To remove excess water, wrap the garment in a large terrycloth towel and gently squeeze. The towel can be wrung out and repeated.
Fasten again already clean wet fur on the surface and comb your hair his comb with rounded teeth. While the item is drying, periodically go up to it and comb your hair so that the pile is smooth and fluffy.
You can finally remove the product "from the hook" only after complete drying so that it does not "lead" in any direction we do not need. This is the golden rule - dry, then detach from the table.

Useful notes.

- It happens that from the first time it was not possible to paint as desired - either the color is not the same, or the color did not lie evenly.
  If this happened - repeat staining after 10 days, this time it will definitely work out, because now you already have experience)
- If you are a sophisticated fashionista and a simple one-color dyeing of faux fur is too simple or boring for you - arm yourself with narrow lips, thin brushes and stencils. Following the dictates of your imagination, create your masterpiece, even if it's just colored specks.
  By the way, drawings can be applied and alcohol marker.

At least in a speck, at least in a strip)

And if you tie some parts of the product with strong nylon threads when painting, then in the end you will get a very spectacular drawings... My parents (if not grandparents) dyed jeans and T-shirts this way. Such a trick will pass if the paint is initially darker than the thing to be painted by several tones.
Another option for creative painting of Ekomekh is from a distance of 40-70 cm (the distance is determined independently, "according to your taste"). Then only the tips will be painted, and the base itself will remain the same. Comb the fur immediately after painting to prevent the tips from sticking together - the paint dries quickly!

And finally, one interesting question.

And what if you suddenly want to bleach dark fur, that is, lighten it. Let's say there was a brunette fur, and I want a blonde one. Can I use hair brighteners or is it dangerous for synthetics?
Maybe then it is better to try bleaches specifically for synthetics? After all, a specially designed product should not damage the fake fur, because, as a rule, these are delicate bleaches.

There were two questions, yes) But the meaning is the same - how to make white out of black ... well, or at least gray. Is it possible? Who has any ideas on this score? Maybe there are lucky ones who succeeded ??
Write in the comments, we will discuss)) I rub my pen in anticipation).

Readers rate the article on