Quasi uno fantasy. Quasi uno fantasy quasi una fantasy

Here my brain is arranged so that if you have an idea, like it or not, it still thinks. Dobro would think about reasonable, kind, eternal, like about a million dollars or about beautiful women, but no, everything is somehow more trifles clogged, for example, how can we reorganize the Rabkrin or make the radio tape recorder even more radio cassette. New trends are engulfing rebellious minds and it is difficult for me to stand aside, therefore I am inventing something. Well, for example, I got such a thing.

Sharp GF-700 made by the firm Sharp, I do not attach myself to her glory. But you didn't see anything special in him?

No? And so?

Also no? Well, here's a thick hint.

Well, here I just revealed my cards. I hope everything is clear. Well, except for why there is an adapter for 3.5 mm for headphones on the left, I need to explain that I plan to use such an adapter to bring out the photodiode to receive signals from the remote control.

This is how the whole composition should look like in the end. On the right is a flash drive, on the left is a photodiode (draw it in your head).

I will not tell you for a long time how
I have become a craftsman:
Having killed the sounds,
Sharpe I tore apart like a corpse. Believed
I'm algebra harmony.
In short, I decided to use the slightest opportunity to preserve visual authenticity as much as possible. The people are depriving the radio tape recorder of counters, maybe this is how they understand harmony, for me the road counter is like a mechanical unit, and what radio tape recorder is without mechanics? In general, as the husband of N.K. Krupskaya said, we will go the other way. Another way is to find a small connector and insert it into the existing natural holes. Well those on the face Sharp GF-700 I found three pieces. The headphone jack is still relevant, but microphone jacks are now an absolutely meaningless and unnecessary thing, who will now record something on them?

Other Sharps have such connectors (777, 800, 939).

Radio tape recorders from other companies practically do not have such connectors, they are either 3.5 mm in size, or are located in inconvenient places. And since I noticed that such crap as the installation MP3 with an external flash drive, it is mainly the owners of large Sharps who suffer, then our task is to meet them halfway and offer our own version.
"Suffering crap" in this case is not an insult, just earlier, to excuse the army from the army, recruits told the doctors at the medical board that they were suffering from a hernia, and a hernia in Latin is hernia, hence the expression "to suffer from crap." Well, doesn't it look like a hernia sticking out in front or where else is a flash drive? Therefore, no offense.
I thought for a long time how something could be placed in a hole with a diameter of 6.3 mm, any connector and did not find a solution, well, not micro USB to sculpt there? And then I realized that 6.3 mm is the inner size, while the outer one is much larger, as much as 10.5 mm. And there is where to roam! My gaze somehow fell on the keyboard and I saw that it had a connector at the end of the wire PS / 2 with six contacts, and I only need four.

I measured the outer diameter of the connector, it was 9 and tenths of a millimeter.

This gave a good chance that the mate (mother or female) would not be much larger. Went to the nearest radio store, they had mini DIN connectors, but for a different number of legs. But there I saw a ready-made adapter with USB on PS / 2, this greatly simplified the task for me, since initially I intended to solder these two connectors myself.

In another radio store I found my mother PS / 2 exactly the design I needed.

The outer diameter over the metal ring was 10 mm.

This is how our main connectors look from the opposite side.

The connector is disassembled PS / 2 very simple, it can be taken out of the outer tube and laid out in two halves.

To install the connector on the microphone input board, I unsoldered the wires from this board, we are unlikely to need them already.

Back side view of the board. I decided to unsolder one of the microphone jacks, namely the right one.

Since the connector PS / 2 the outer radius of the plastic cover was more than 11 mm, I decided to cure phimosis by doing circumcision. To PS / 2 entered the hole for the microphone jack, I had to cut about 2.5 mm of the plastic foreskin.

Mom's outer cover PS / 2 was somewhat long. I shortened it to fit the size of the soldered-out microphone connector.

Here they are, the old and the new connector, approximately similar in length and height.

I began to think about how to attach a new connector PS / 2 to the board, it's round. There were thoughts of putting on hot melt glue. And then I realized that the emphasis on the radio case would interfere with moving it back, and the front panel would not let the front panel stick out. It is only necessary to slightly limit the travel of the connector to the sides of its axis. To do this, I soldered a pair of wire half rings.

I inserted an external cover into them.

An extractor (half rings were soldered to a slightly smaller size) inserted a connector into it PS / 2.

I inserted the board into the case.

I called my friend, told me how everything turned out for me. He advised me to check the adapter USB on PS / 2 whether there is a driver inside. And although I was especially told in the store that there was no driver in it, I disassembled the adapter, and then, according to the pinout, checked the contacts on both sides of the adapter, they exactly corresponded to the pinout indicated on the Internet.

Who does not want to solder wires to a USB flash drive, can use a reverse adapter mother as a receiving node USB- dad PS / 2, these are also sold. Then with MP3 player, this adapter can be connected with a short cable USB-USB.

In total, I believe that I have found an elegant solution for connecting a USB flash drive from the front side with minimal alteration of the device's appearance. I don't have it at hand yet MP3 a player with a remote control and at the same time without any frills such as a card slot or a color display, but as soon as it appears, I'll insert it. At the same time, I will connect the receiving photodiode from the remote control.

By the way, can you tell me who puts what players and where does he get them or does he get them from what? I just want to minimize the costs of this set-top box, I just need a player with a USB flash drive and a remote control, the rest is all from the evil one and there is no intention to pay for it, anyway it will not be used.

Who wants to repeat my version for himself, please. In the case of commercial use, you can send me royalties, oats in the form of gasoline are expensive these days.

Quasi uno fantasy is a significant phenomenon!

Have you asked yourself the question, what is quasi uno fantasy? If so, you need to find out the meaning of this phrase by reading this article.
Quasi uno fantasy this is an adverb used by the architects of ancient Rome and the Mediterranean countries, in relation to something incredibly beautiful, forcing to reconsider the views on the already existing idea of ​​architecture.
In the film 12 chairs, Ostap Bender, almost like a robot Bender in Futurama (a strange coincidence), used the phrase “quasi uno fantasy” in his speech about building a bright future, which once again confirms the connection of this phrase with the construction industry, namely architecture.
Mention of the use of the phrase " quasi uno fantasy”Concerning the leaning tower of Pisa, is mentioned in the manuscripts of the chronicler Johann III.
Literally the phrase sounded as follows.
This structure, although it is very crooked, but nevertheless, will fail me in this place, it is a quasi uno fantasy.
Based on the above, quasi uno fantasy translates as - yeshkin cat, this is an incredibly unusual building.

Output:
Due to the fact that the phrase “ quasi uno fantasy”Was used mainly by people knowledgeable in construction, it can be argued that this adverb is a construction term meaning something incomprehensible.
We will continue to study this issue, and will certainly give a more detailed explanation of the term "quasi uno fantasy". Do not judge harshly for this nonsense.

The idea of ​​battery people is also voiced in the film "The Matrix" through the mouth of Morpheus. He admits: “The human body creates more bioelectricity than a 120 V battery + 6300 calories of heat. Combined with thermonuclear energy, machines have enough in abundance ... There is a clearing, an endless clearing - people are not even born there. We have been grown for a very long time. " Thus, humans are used as batteries, supplying heat to human souls on the far side of the moon, as well as providing energy to all lunar mechanisms.

Since people continuously supply electricity and heat radiation to the Moon, there are two streams invisible to the human eye that connect the Earth with the Moon. One stream can be compared to a power cable that is fed by the biofield of every inhabitant of the Earth. The second stream is powerful IR radiation. Electricity is delivered to the moon through the Earth's magnetic field line that exits from the planet's magnetic pole. As for the flux of infrared radiation, it is delivered to the Moon through the so-called shielding pentagon located above the Geographic Pole of the planet.

The "shielding pentagon" effect is discussed in the book "The Interplanetary Day After Tomorrow" by David Wilcock and Richard Hoagland using the example of Jupiter.

The effect is based on the fact that a sharp drop in temperature is observed inside the geometric boundaries of the pentagonal structure above the north pole of Jupiter. Such effects are very typical for many planets, including the Earth. They are associated with vortex ascending currents that arise over the depressions in the region of the poles during the continuous rotation of the planet around its axis.

Terrestrial infrared radiation also hits the edges of the "shielding pentagon" and is reflected into the upper atmosphere. Just like the flow of terrestrial electricity, the resulting IR flow ultimately hits the moon.

The shielding pentagon has a free radical "star" in our body. She's the star of Baphomet. Due to the peculiarity of its structure, the free radical pentagon as well as the "shielding pentagon" constantly cools the human body, while the infrared radiation escapes into the earth's atmosphere. The ends of Baphomet's star symbolize the infrared rays reflected from the free radical pentagon. No wonder the communist Masons chose the red five-pointed star of Baphomet as their symbol. Often in such a star, many small rays are depicted coming from the center.

The central part of the pentagram, which looks like a pentagon, is especially popular in the Masonic environment. The headquarters of the US Department of Defense has the appearance of such a pentagon. In the Soviet Union, it became widespread in the form of the so-called quality mark.

In Gaidai's film Sportloto 82, the quality mark is on chicken eggs. In Masonic mysticism, the egg denotes the soul of a person. Presumably, the eggs marked with a pentagon indicate the recruitment of the human soul to serve the lunar Matrix.

So, the Earth and the Moon are connected by two streams. One of them is the flux of infrared radiation that forms over the Geographic Pole of our planet. The other is the flow of electrons entering the Moon along the line of force of the Earth's Magnetic Pole. Of course, modern man cannot see these two streams, as they say, with the naked eye. But our ancestors could see these two streams and, knowing that all information would be hidden, informed us, their descendants, about their existence in the form of a harmless fairy tale.

Many people are familiar with the hut on chicken legs, in which Baba Yaga lives. In reality, this is not an ordinary ramshackle hut, located somewhere in a dense forest, as many believe. The hut on chicken legs is the Moon, from which two "thin legs" stretch to the ground in the form of the two above-mentioned streams - the stream of electrons and the stream of infrared radiation. These two legs and a round Moon are represented in Freemasonry as the number "101".

In the very same "hut" the Lunar Matrix is ​​hidden. Our ancestors called her simply - Baba Yaga. This granny is a big lover of "putting a pig" on people. In the film "Frost" by the famous director Alexander Rowe, who was also a high degree of dedication Freemason, Baba Yaga uses a pig-shaped sleigh to fool Ivanushka, leading him through the forest "around the bush."

In the film "Frosty", Rowe shows not only the true appearance of the lunar Yaga-Yahweh, but also demonstrates the antics of the mischievous Lucifer, who appears in the form of Santa Claus or Frost. He walks through the forest with his magic staff and freezes all living things with it. Presumably, this gives him special pleasure, since he constantly drinks a song about a Christmas tree and laughs like a gray gelding. It is not for nothing that the expression “chilling horror” has appeared among the people.

In the cartoon "Last Year's Snow Was Falling," a hut on chicken legs is presented in the form of a laying hen sitting on eggs. The authors of the cartoon are apparently quite knowledgeable persons. After all, human souls are also warming themselves on the moon. And the symbol of the soul in Freemasonry, as you know, is the egg. So the symbolism of this scene, as they say, is on the face.