Control system logamatic 2109. No interest charged when paying by credit card

You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having made an order today, tomorrow you will receive it at your disposal. If necessary, you can use the prompt delivery service and receive the products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor)

Delivery is made daily from 9 am to 9 pm including weekends and holidays.

Check the exact delivery time with the manager!

Pickup points

Delivery cost in Moscow and Moscow region:

• Within the Moscow Ring Road - from 0 to 500 rubles, (the individual delivery cost is indicated in the product card)
• Outside MKAD up to 10 km - 700 rubles,
• Outside the MKAD more than 10 km - 700 rubles + 30 rubles for each kilometer.
• In the regions, delivery by the Transport company (calculated individually).

Shipping cost per

km from MKAD

RUB 700

Unloading of bulky goods is carried out by the forces and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to its simplicity and ease of calculation.

Payment by credit card to the courier upon receipt

Couriers have a portable banking terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).

Payment by credit card on the website

To select payment with a bank card on the "Cart" page, you must select the item "Payment by bank card on the site".

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia to enter the details of your card.

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments at the bank that issued the card.

This site supports 256-bit encryption. Confidentiality of the reported personal information provided by Sberbank of Russia OJSC. The entered information will not be provided to third parties, except in cases provided for by the legislation of the Russian Federation. Bank card payments are carried out in strict accordance with the requirements of Visa Int. and MasterCard Europe Sprl.

When paying by credit card, no interest is charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work for common system taxation with VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used in the calculations by legal entities.

Our details

Society with limited liability"Teplovod-Service"

OGRN: 1105003006162

INN: 5003088884

Checkpoint: 500301001

BIK: 044525225

Bank: PJSC "Sberbank of Russia"

R / s: 40702810838060011732

K / s: 30101810400000000225

Yur. address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., Office B-6

Special conditions

For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.

For goods with the "On order" status over 100,000 rubles. an advance payment of 30% is required.

• Any item shipped by a shipping company requires 100% payment.

20 086 rub.

Vendor code:
30005510

Best price

Found it cheaper? Call us and we will provide the most advantageous personal offer!

Shipping and payment

Control system for floor standing boilers Buderus Logamatic 2109 characterized by high reliability and ease of maintenance. It features an intuitive menu and a wide range of automatic functions that make the regulation process simple and comfortable.

The modular structure of the control system provides virtually unlimited expansion possibilities. All units are ideally combined, as all Buderus equipment is perfectly coordinated with each other.

Buderus Logamatic 2109 is designed for boilers that are operated via a boiler water temperature controller or a room temperature controller. The control system, in addition to the boiler water temperature regulator and the safety temperature limiter, has a boiler water thermometer, a start switch for the boiler burner, heating circuit pump and cylinder charging pump, a switch for setting the hot water temperature and a summer-winter switch.

The advantages of the automatic control system Buderus Logamatic 2109:

• Integrated function for controlling the operation of a boiler with a single-stage burner:
• Protection against radio and television interference;
• Manual summer / winter switching;
• Preparation of water for hot water supply through the tank loading pump;
• Complete electrical wiring;
• Protection degree IP 40;
• Intuitive controls;
• Efficiency and economy of the heating system;
• Boiler water temperature regulator with a range of 50-90 ° С;
• Integrated temperature limiter (110 ° С);
• Supplied with boiler water and DHW cylinder temperature sensors;
• Microprocessor control;
• The delivery set includes a universal fast assembly system;
• High reliability and ease of maintenance.

All Buderus Logamatic control systems are supplied in a recyclable plastic housing, with a universal quick-fit system, color-coded and numerically coded connectors, fully wired and protected against radio and TV interference.

Specifications

• Boiler control with a single-stage burner; a DHW tank and a heating circuit without mixer.
• Boiler water temperature regulator in the range of 50-90 ° C.
• Protection class IP 40.
• Protection against TV and radio interference.
• Electrical wiring.
• Preset hot water temperature 30-60 ° C.

Boiler Automation Buderus | control systems Buderus Logamatic 2101/2107/2109, temperature regulators: description, prices, operating and installation instructions, electrical diagrams.

Buderus Logamatic 2109

Control system for a boiler installed in a cottage for one or two families with low or medium heat demand

Control function for operation with 1-stage burner

With boiler water temperature regulator 50-90 ° C

High limit safety cut-out 100 ° C

For boiler operation with a constant boiler water temperature and with the subsequent connection of one heating circuit without mixer

Operating mode with room temperature control via customer thermostats

Functions for preparing drinking water

Priority DHW preparation

Preset hot water temperature 30 - 60 ° C

Boiler safety function due to special pump switching circuit (pump logic)

Manual switching of summer-winter modes

Recyclable plastic housing

The connecting plugs are color-coded and numerically coded

Complete electrical wiring

Protection class IP 40

Protection against radio and television interference

With boiler water temperature sensor (cable for 1-stage burner is included in the boiler scope of delivery)

With universal fast assembly system

Control system for floor standing boilers Buderus Logamatic 2109 30005510

TeploSpetsCentre, OOO

Spartakovskaya square, house 14, building 1, right entrance, office 306, 105082 Moscow

Itek, OOO

st. Watchtower, 4, building 3, 111020 Moscow

Thermo studio, OOO

Varshavskoe shosse, 25 A, bldg. 6, 117105 Moscow

NIK engineering (Peltech branch), LLC

Dokukina str. 10, building 41, 129226 Moscow

Rainbow-service, OOO

st. Azovskaya, 15-A, 117452 Moscow

Pelteh, OOO

st. Kotlyakovskaya, 3, bldg. 1, 115201 Moscow

Termosystem, OOO

Irkutskaya, 11/17 office center Schelkovsky, 107497 Moscow

PROTON +, LLC

st. Kolontsova, 15, 141009 Mytishchi

LEX plus, OOO

Festivalnaya st., 2, 142152 Fedyukovo

PROTON +, LLC

st. Sovetskaya, 90, 143430 Nakhabino, Krasnogorsk District

BasisTeploStroy, OOO

Rublevo-Uspenskoe highway, 28 km from MKAD, 50/1, 143032 Gorki 10

Teplosfera ITs, OOO

Pryvokzalnaya st., 12, 601010 Kirzhach

The online store site delivers any product with its own delivery service.

Before you start using the product, check whether your idea of ​​the product corresponds to its real characteristics. It is extremely rare, but there are cases of errors in the product description on the site. All main characteristics are indicated in the instruction manual attached to the product. You can refuse the goods if, upon receipt of the goods, you find a difference in its description on the website and instructions. Try to find out this issue before the start of operation of the product, and we will promptly change the product or refund the money.

Please note that due to the multiple increase in fines for incorrect parking, delivery of orders to office buildings in the absence of free parking spaces or admission to the territory is not guaranteed. We reserve the right to ask to meet our driver before entering the building.

	Order amount up to 5,000 ₽	Order amount from 5,000 rubles to 50,000 rubles	Order amount from 50 000 ₽
Moscow city	730 ₽	390 ₽	Is free
St. Petersburg	730 ₽	390 ₽	Is free
beyond the ring road	730 ₽ + 30 ₽ / km from the ring road	390 ₽ + 30 ₽ / km from the ring road	30 ₽ / km from the ring road
To the cities of the Moscow region
Lyubertsy city district	770 ₽	440 ₽	90 ₽
Urban district Mytishchi	770 ₽	440 ₽	90 ₽
Urban district Reutov	770 ₽	440 ₽	90 ₽
Khimki urban district	770 ₽	440 ₽	90 ₽
Krasnogorsk city district	880 ₽	540 ₽	190 ₽
Balashikha urban district	880 ₽	540 ₽	190 ₽
Dolgoprudny urban district	880 ₽	540 ₽	190 ₽
Leninsky district	1030 ₽	690 ₽	340 ₽
Odintsovskii district	1030 ₽	690 ₽	340 ₽
Dzerzhinsky city district	1030 ₽	690 ₽	340 ₽
Korolev urban district	1070 ₽	740 ₽	390 ₽
Lytkarino urban district	1070 ₽	740 ₽	390 ₽
Urban district Ivanteevka	1170 ₽	840 ₽	490 ₽
Lobnya city district	1170 ₽	840 ₽	490 ₽
Podolsk city district	1230 ₽	890 ₽	540 ₽
Domodedovo urban district	1230 ₽	890 ₽	540 ₽
Pushkinsky district	1280 ₽	940 ₽	590 ₽
Schelkovsky district	1280 ₽	940 ₽	590 ₽
Vlasikha closed city district	1480 ₽	1140 ₽	790 ₽
City district of the closed city of Krasnoznamensk	1480 ₽	1140 ₽	790 ₽
Zhukovsky Urban District	1480 ₽	1140 ₽	790 ₽
City district Krasnoarmeysk	1480 ₽	1140 ₽	790 ₽
Fryazino urban district	1670 ₽	1330 ₽	970 ₽
Losino-Petrovsky urban district	1670 ₽	1330 ₽	970 ₽
Istra urban district	1800 ₽	1470 ₽	1090 ₽
Ramensky district	1800 ₽	1470 ₽	1090 ₽
Noginsk district	1800 ₽	1470 ₽	1090 ₽
Urban district Chernogolovka	1970 ₽	1640 ₽	1290 ₽
City district Bronnitsy	1970 ₽	1640 ₽	1290 ₽
Elektrostal urban district	1970 ₽	1640 ₽	1290 ₽
Zvenigorod urban district	1970 ₽	1640 ₽	1290 ₽
Dmitrovsky district	2230 ₽	1890 ₽	1540 ₽
Solnechnogorsk district	2230 ₽	1890 ₽	1540 ₽
Urban district Chekhov	2230 ₽	1890 ₽	1540 ₽
Naro-Fominsk urban district	2530 ₽	2190 ₽	1840 ₽
Sergiev Posad district	2530 ₽	2190 ₽	1840 ₽
Urban Okrug ZATO Voskhod	2530 ₽	2190 ₽	1840 ₽
Urban district Pavlovsky Posad	2680 ₽	2340 ₽	1990 ₽
City district Elektrogorsk	2680 ₽	2340 ₽	1990 ₽
Delivery to these cities is carried out through a transport company. Below is the cost of delivery to the terminal transport company in Moscow
Volokolamsk district	730 ₽	390 ₽	Is free
Voskresensky district	730 ₽	390 ₽	Is free
Egorievsk urban district	730 ₽	390 ₽	Is free
Zaraysk city district	730 ₽	390 ₽	Is free
Kashira urban district	730 ₽	390 ₽	Is free
Klin City District	730 ₽	390 ₽	Is free
Kolomna urban district	730 ₽	390 ₽	Is free
Lotoshinsky district	730 ₽	390 ₽	Is free
Lukhovitsy city district	730 ₽	390 ₽	Is free
Mozhaisky district	730 ₽	390 ₽	Is free
Urban Okrug Ozyory	730 ₽	390 ₽	Is free
Ruzsky urban district	730 ₽	390 ₽	Is free
Stupino urban district	730 ₽	390 ₽	Is free
City district Silver Ponds	730 ₽	390 ₽	Is free
Taldom district	730 ₽	390 ₽	Is free
Shatura urban district	730 ₽	390 ₽	Is free
Shakhovskaya urban district	730 ₽	390 ₽	Is free
ZATO urban district Zvezdny Gorodok	730 ₽	390 ₽	Is free
City district ZATO Molodyozhny	730 ₽	390 ₽	Is free
Urban district Orekhovo-Zuevo	730 ₽	390 ₽	Is free
City district Dubna	730 ₽	390 ₽	Is free
Urban district Serpukhov	730 ₽	390 ₽	Is free
Urban district of Pushchino	730 ₽	390 ₽	Is free
Urban district Protvino	730 ₽	390 ₽	Is free
Urban district Kotelniki	730 ₽	390 ₽	Is free
Roshal urban district	730 ₽	390 ₽	Is free
Likino-Dulyovo urban district	730 ₽	390 ₽	Is free
To the cities of Russia to the transport company
To the terminal of the transport company	730 ₽	390 ₽	Is free
Pickup - free of charge

Delivery terms:

The purchased goods are delivered to the entrance (the gate of the cottage or the gate of a private house). In case of any reasons that prevent access vehicle, delivery is carried out to the place as close as possible to the place of the planned unloading of the goods without violating traffic rules. If a paid entry is provided on the territory of the destination of delivery, then the Buyer must compensate the cost of entry of the vehicle.

Rise to the floor

You can use the Lift goods service. This service is paid. The employees of our company will lift your order directly to the apartment, regardless of whether there is an elevator in your house. Prices for the rise, check with the manager.

Can I use the services of a third-party shipping company for delivery?

Yes, this option is possible by agreement with your personal manager. In this case, you will pay only for delivery in Moscow, but our responsibility for the safety of the goods will be limited to the moment the order is transferred to the transport company of your choice.

Transport companies:

ATTENTION! Within 7 (seven) days after receiving the goods, you have the right to refuse to purchase without giving any reason, if you have not used the goods and have completely preserved its packaging and presentation.

Refunds of the transferred funds are made to your bank account or in cash (depending on the method of payment) within 5-30 business days (the period depends on the Bank that issued your bank card).

In case of refusal by the client from the delivered goods on time and proper quality, the customer will reimburse the shipping costs.

All the products of our online store site have certificates of conformity, warranty certificates and instructions in Russian.

Above the specified limits, an additional fee of 30 rubles is taken. for 1 km.

The prices indicated on the website are final and do not require additional payments under standard delivery conditions. All taxes are included in the price of the item.

Possible payment methods

	Cash: cash payment to the courier upon delivery in Moscow, Moscow region, or upon pickup at the store's office.
	Cashless payments: payment for goods cashless payments possible by all legal and individuals... After receiving the order, you will be sent an invoice for e-mail... The account is valid for payment within three banking days. After paying the invoice, we ask you to contact the manager and inform about the payment of the invoice or send a payment order by e-mail [email protected] so that we do not make a reservation at the warehouse and check the date and time of delivery with the manager.
	By bank card to the courier or in our office: We accept the following types of cards for payment: Visa, Visa Electron, Mastercard, Mastercard Electronic, Maestro. If you want to pay for the goods by credit card, please indicate this in the comments to your order. You can pay by card upon receipt of the goods to the courier or at the pick-up office, via a mobile terminal.
	1. After the manager confirms the availability of the goods, transfer the required amount in rubles to our account4100 1837 5253 09 through the Yandex.Money wallet. 2. In the absence of a wallet, transfer money to our account through instant payment terminals or in banks in your city,servicing Yandex.Money payments. After payment, send to [email protected] payment notification.

Warranty obligations

1. The manufacturer's warranty period for equipment (with the exception of some series indicated separately) is 24 months from the date of commissioning of the equipment, but not more than 27 months, respectively, from the date of purchase of the equipment by the end user.
2. The warranty period for units and assemblies replaced after the expiration of the warranty period, as well as for spare parts, is 12 months from the date of installation. The date of installation of the spare part must be recorded in the warranty card for the equipment.
3. To provide the Manufacturer with warranty obligations, the observance of the following conditions is mandatory:

• Installation and commissioning of equipment must be carried out in compliance with applicable building codes and regulations (SNiP), state standards(GOST), local standards, as well as the instructions for installation and operation of the Equipment Manufacturer and the corresponding regulatory and technical documentation of the Russian Federation;
• Installation, commissioning of equipment and commissioning should be carried out by specialists who have permission to perform such work, or by organizations authorized by the Manufacturer for installation and / or warranty service the appropriate type of equipment, the list of which is indicated on the websites bosch-climate.ru and / or www.buderus.ru;
• Presence of a commissioning certificate and / or a mark on installation / commissioning of equipment in the warranty card;
• After 12 (twelve) months from the start of operation of the equipment, within 2 months, it is necessary to make a scheduled Maintenance equipment with a corresponding mark in the warranty card by a service organization authorized by the Seller and / or Manufacturer;
• The equipment should be stored in a warm, dry room prior to installation.

1. Claims for satisfaction of warranty obligations will not be accepted if:

4.1. Constructive changes have been made to the equipment, without the consent of the Manufacturer / organization authorized by the Manufacturer to carry out such work.

4.2. Parts of someone else's production are installed on the equipment.

4.3. The rules for the installation and operation of the Manufacturer's equipment are not followed.

4.4. Repair or intervention in the equipment was carried out by specialists not authorized to repair the corresponding type of equipment;

4.5. The malfunction is a consequence of:

• connecting equipment to communications and systems (power supply, water supply network, etc.) that does not comply with GOST, SNiP requirements and instructions for installation and operation of equipment;
• use of energy and heat carriers that do not meet GOST, SNiP requirements and the instructions for installation and operation of equipment;
• getting into the product of foreign objects, substances, liquids, animals, insects, etc.
• receiving mechanical damage during the period of delivery of the equipment by the forces of the Consumer from the point of sale to the place of installation and operation, which caused the equipment to malfunction;
• improper operation of related equipment related to the technological dependence of the Manufacturer's products, including short circuits, voltage drops (fluctuations) in the supply network, various types of failures and interruptions (in violation of established standards and norms) in the functioning of other engineering networks and communications on site installations;
• equipment malfunction due to air pollution due to abundant dust deposition, due to aggressive exposure to vapors, oxygen corrosion, chemical, electrochemical or electrical influences, installation of equipment in unsuitable premises, or if the equipment continues to be used after a defect is detected.
• actions of forces majeure (fire, flooding, natural disasters etc.), as well as deliberate or careless actions and negligence of the Consumer or third parties.

1. The warranty does not cover:

• Cases where wear parts such as burner nozzles, burner tips to reduce emissions, magnesium anodes, fuses, seals, combustion chamber linings or flame-contacting ignition and flame control devices (and the like) fail due to normal wear and tear.
• cases when, due to any malfunction, the equipment was dismantled without the consent of the Manufacturer / organization authorized by the Manufacturer to carry out such work.

1. The manufacturer is bound by the Consumer Protection Act.
2. When making a complaint about the quality of the goods, the Consumer is obliged to provide access to the equipment for checking its quality. At least once a year, the equipment must undergo maintenance in service centers... In case of violation of this requirement, the Manufacturer has the right to refuse warranty repair and replacement of equipment. The term for eliminating the malfunction should not exceed 45 (forty five) days.

For your safety:

Installation, commissioning, repair and maintenance should only be carried out by specialists who have permission to perform these types of work.

For reliable and safe operation of the equipment, it is recommended to install filters on the gas and water supply (hot water supply), a dielectric separating insert on the gas connection lines, the obligatory installation of a filter on the return pipe of the heating system, and it is also recommended to use an uninterruptible power supply or voltage stabilizer, the use of systems water treatment in the heating system. Make sure the hardware matches the system to which it will be connected or to be installed. Fuel parameters and electrical network coincide with those specified in the instruction manual.

The manufacturer's warranty obligations have been explained to me, I understandand are fully approved by me.

Reference: 30005510

Description:

Control system for a boiler installed in a cottage for one or two families with low or medium heat demand
- Control function for operation with 1-stage burner
- With boiler water temperature regulator 50-90 ° C
- Safety temperature limiter 100 ° C
- For boiler operation with a constant boiler water temperature and with the subsequent connection of one heating circuit without mixer
- Mode of operation with room temperature control via customer thermostats
- Functions for preparing drinking water
- Priority DHW preparation
- Preset hot water temperature 30 - 60 ° C
- Protective function of the boiler due to a special pump switching circuit (pump logic)
- Manual switching of summer-winter modes
- In a housing made of recyclable plastic
- The connecting plugs are color-coded and numerically coded
- Complete electrical wiring
- Degree of protection IP 40
- Protection against radio and television interference
- With boiler water temperature sensor (cable for 1-stage burner is included in the scope of delivery of the boiler)
- With universal fast assembly system

Functions Logamatic 2109

The control system is intended for boilers that are operated via a boiler water temperature regulator with a constant boiler temperature or via a room temperature regulator. It is possible to regulate the temperature of hot water by connecting a loading pump to a separate water heater. When a room temperature controller is connected, it determines the boiler water temperature. The control system, in addition to a boiler water temperature regulator and a safety temperature limiter, has a boiler water thermometer, a start switch for the burner, boiler, heating circuit pump and cylinder charging pump, a switch for setting the hot water temperature and a summer-winter switch.

Additionally, an operating hour counter can be installed. In summer mode, the boiler operates exclusively for DHW heating.

When a room thermostat is connected, the heating circuit pump runs in heating mode for about 10 minutes or in continuous mode, after which the burner is switched off. Select continuous mode work or 10-minute work can be done with a switch on the PCB. The hot water preparation mode can take place in priority or in parallel with the heating mode.

There is a switch for this setting, also located on the PCB. In priority mode, the total boiler output is primarily used for DHW heating. In priority DHW heating mode, the heating circuit pump remains off until the pump has finished loading the tank with hot water. In order for the heating medium with a high temperature not to enter the heating circuit immediately after hot water preparation, the loading pump of the DHW tank runs for about 4 minutes after the end of the loading process. If the DHW temperature control is deactivated, the tank also remains protected against frost. When the temperature in the tank drops below 5 ° C, the preparation of hot water is automatically turned on with heating up to 15 ° C.

Documentation

Operating instructions Logamatic 2109		416 Kb

Assembly of printed circuit boards, great choice!