1c enterprise toir. General description of the system "1C: MRO Management of equipment maintenance and repairs". Unified information field and convenient statistical accounting

The solution is intended for specialists in the organization of repairs and maintenance industrial equipment as well as for all divisions that have anything to do with asset management, repairs and maintenance.

The software product "1C: Enterprise 8. MRO Equipment Repair and Maintenance Management" contains a number of features that improve the efficiency of various services of enterprises and provides:

the management of the enterprise and managers responsible for business development: ample opportunities for analysis, planning and flexible management of enterprise resources to increase competitiveness, "transparency" of production assets is ensured;
heads of departments, managers and employees directly involved in production, sales, procurement and other activities to support the production process: tools to improve efficiency daily work in their directions;
repair service workers: the ability to use products as a basis for work management - an archive of all regulatory and technical documentation, PPR schedules are calculated, orders for repair work are written out, repair work is recorded.
employees of the company's accounting services: tools for automated accounting in full compliance with the requirements of the legislation and corporate standards enterprises;

The solutions can be used both at individual enterprises and in production holdings to ensure the unification of production and regulated accounting of repairs.

When developing the configurations "1C: MRO Equipment Repair and Maintenance Management" and "1C: Repair Enterprise Management", both modern international methods of enterprise management (EAM, CMMS, MRP II, CRM, SCM, ERP, etc.) were taken into account, as well as the experience of successful enterprise automation accumulated by 1C and the partner community.

Main specialized functions and capabilities:

Reference information maintenance

Maintaining a list of equipment

To maintain a list of equipment in the system, there is a hierarchical directory "Objects of repair".
The depth and structure of the tree is arbitrary. Usually, the production and technological structure of the enterprise is reflected, up to pieces of equipment that require planning and accounting for repairs.

Repair and maintenance objects are elements of the tree. Each element is represented by information on the passport data of a specific repair facility.

System directories

The system maintains the following directories:

Reference: Types of defects

The reference book is intended to store a list of possible types of defects in the equipment used at the enterprise. With the help of the reference book, you can make an additional classification of the same type of defects in various repair objects.

Reference: Types of work schedules

The reference book contains a list of all work schedules of the enterprise and stores information about the amount of working time by day and / or shift. The schedule parameters are set in the Schedule Fill Wizard, which allows you to set general parameters, and based on these parameters, automatically fill in the work schedule for the next year.
The schedule can be filled in according to one of the proposed templates or you can make settings manually.

Directory: Repair groups of repair objects

A repair group is a group of repair objects with the same standard maintenance and repairs. Repair groups are designed to simplify the entry of information on routine repairs for each repair facility and to minimize the size of the system database.
Each repair group combines normative maintenance and repairs for a list of the same type of repair objects. A refurbishment object can only be included in any one repair group.
To set a standard repair in a repair group, it is necessary to establish a correspondence between the type of repair, the technological operation (with standards) and the method of planning this repair.
After filling out the list of normative maintenance and repairs, it is necessary to fill in the list of repair objects of the same type for which the indicated maintenance and repairs are normative in the "Repair group composition" tab of the repair group entry / correction form.

Maintenance of technological maps of repairs

For maintenance of technological maps of repairs in the system, the reference book "Technological maps of repairs" is intended.
When entering a repair flow chart, a list of technological operations is indicated.

Repair flow charts: material costs and labor costs

The essential elements of every technological operation are material and technical support and labor resources.

Repair flow charts: guidelines and instructions

List of RD and Instructions governing this repair.

Equipment passport

For each object of repair, you can specify the following basic passport data: manufacturer, date of issue, passport number, serial number, technological number, inventory number.

Repair object: characteristics

In the tab "Characteristics" are set specifications object of repair.

Renovation object: indicators

The system provides for the ability to record the values of monitored equipment indicators.

Renovation object: Operating time

The system provides the ability to keep a log of equipment operating time.
For each equipment, the operating time values are entered into the system by an authorized employee. The number of operating time types for each object is not limited.

Renovation object: Repairs

For each object of repair, the system provides the ability to store information about all repairs performed.
To do this, use the Repairs tab in the form for entering / adjusting a repair object.

Repair planning

A list of PPR graphs is intended for maintaining the PPR schedules.
When entering the PM schedule in the system, you must specify the following basic data:

date of the schedule;
the period for which you need to draw up a schedule;
the organization for which the schedule is being drawn up;
department for which the schedule is drawn up;
a list of repair objects for which it is necessary to draw up a schedule;
a list of types of maintenance and repairs for each repair facility that must be included in the schedule.

Renovation planning: selection of objects

For the convenience of the user, the system has the ability automatic selection groups of objects to be repaired.

Repair planning: PM calculation

After specifying the objects of repairs and types of repairs, the PPR schedule must be built using the Fill button in the form of entering / adjusting the schedule.
To visualize the PPR schedule, use the Build / Update button on the Repair Diagram tab.

Repair scheduling: printing a maintenance schedule

After calculating the PPR schedule, it must be printed.

Carrying out repairs

Repair execution: Request for repair

Operational planning of repair work in the system is carried out in the form of repair requests, which can include only the required materials and operations approved in the specifications and technological maps... When creating requests, the planned costs are automatically determined, and when the progress of repairs is taken into account, materials and labor costs are written off for specific repairs.

An order can be triggered by one of the following events:

Identified equipment defect. In this case, an application for unscheduled repairs will be generated.
The onset of the scheduled repair date according to the maintenance schedule. In this case, an application for scheduled repairs will be generated.

Repair execution: Formation and control of orders for repair work

On the basis of the generated repair requests, orders for the execution of repair work are formed. The outfit is issued to the performers (worker, team) before the start of work.

The order is filled in automatically based on the information specified in the application and contains the following information:

list of repairs and their technological operations;
turnaround time;
list of maintenance personnel and their qualifications;
prices;
forms of payment.

Repairs: Accounting for work performed

The accounting of the work performed in the system is carried out through the formation of acts of work performed.

The work completion certificate is formed on the basis of the order.
After entering and carrying out the act of completed work, the costs of MTO and labor costs can be written off.

Equipment service

Maintenance is understood as work carried out without stopping the equipment, work performed operating personnel... Usually these are works included in TO 0, maintaining a log of equipment inspections, entering meter readings.

Accounting for equipment inspections

The system provides the ability to automatically draw up inspection plans.
All defects found during inspections: malfunctions in the operation of the equipment, deviations from the normal state of the equipment, including those that do not require immediate stopping to eliminate them, must be recorded by the operating personnel in the Defect Log.

Calculation of the need for MTO

To determine the need for spare parts, materials and tools for the required period, the system must generate PM schedules for this period. Based on the information about the planned regulatory maintenance and repairs, the system automatically calculates the need for spare parts, materials and tools.

Information about the need for MTO is displayed in the report "MTO Plan".

Metrology: service of measuring instruments

All repairs and calibration of measuring instruments are reflected in the system in the same way as described repairs.
For keeping records of the values of monitored indicators of equipment, the document "Accounting for monitored indicators" is intended.
Budgeting for repairs and maintenance

The system provides the ability to form budgets for maintenance and repairs and cost accounting.
The cost amounts are displayed in the Direct Repair Costs report.

Control of MTO costs

To control the costs of logistics, the report "Plan-actual analysis of logistics costs" is intended.

Labor control

To control labor costs, the report "Plan-fact analysis of labor costs" is intended.

Personnel planning

Information about the planned staffing requirements is displayed in the "Planned Employment of Employees for Repair Work" report.
When the system operates as a part of "1C: UPP", all the possibilities of personnel management are available.

Information for accounting

Fixed asset linkage

When the system operates as a part of "1C: UPP", if the object of repair is the main asset, it is necessary to indicate this in the system for the possibility of accounting for fixed assets. To specify the object of repair as a fixed asset, you must use the field For communication with fixed assets, enter the inventory number.

Integration with accounting

Into the system accounting documents are transferred to reflect the fact of repair in accounting.

Information protection, administration

The mode contains a list of settings with which you can fine-tune the operation of the program. The changes made are valid for all users registered in the system.

Analysis and reporting of the system

To analyze the effectiveness of repair management in the system, you can use the following reports:

Performance Indicator Report.
Plan-fact analysis of work performance.
Plan-fact analysis of labor costs.
Plan-fact analysis of MTO costs.
Item costs.
Ongoing analysis of data on the condition of the equipment.

To maintain a list of equipment in the system, there is a hierarchical directory "Objects of repair".

The depth and structure of the tree is arbitrary. Usually, the production and technological structure of the enterprise is reflected, up to pieces of equipment that require planning and accounting for repairs.
Repair and maintenance objects are elements of the tree. Each element is represented by information on the passport data of a specific repair facility.

System directories

The system maintains the following directories:

Types of defects: intended for storing a list of possible types of defects in the equipment used at the enterprise. With the help of the reference book, you can make an additional classification of the same type of defects in various repair objects;

Types of work schedules: contains a list of all work schedules of the enterprise and stores information about the amount of working time by day and / or shift. The schedule parameters are set in the Schedule Fill Wizard, which allows you to set general parameters, and based on these parameters, automatically fill in the work schedule for the next year. The schedule can be filled in according to one of the proposed templates or manually configured;

Repair groups of repair objects: A repair group is a group of repair objects with the same standard maintenance and repairs. Repair groups are designed to simplify the entry of information on routine repairs for each repair facility and to minimize the size of the system database. Each repair group combines normative maintenance and repairs for a list of the same type of repair objects. A refurbishment object can only be included in any one repair group. To set a standard repair in a repair group, it is necessary to establish a correspondence between the type of repair, the technological operation (with standards) and the method of planning this repair. After filling in the list of normative maintenance and repairs, it is necessary to fill in the list of repair objects of the same type for which the indicated maintenance and repairs are normative in the "Repair group composition" tab of the repair group entry / correction form;

Technological maps of repairs: when entering a repair flow chart, a list of technological operations is indicated. The integral requisites of each technological operation are material and technical support and labor resources, as well as RD and Instructions governing this repair.

Equipment passport: For each object of repair, you can specify the following basic passport data: manufacturer, date of issue, passport number, serial number, technological number, inventory number.

Renovation object: for each object of repair, the system provides the ability to store information about all performed repairs. The technical characteristics of the object of repair are set, the possibility of keeping records of the values of the monitored parameters of the equipment, as well as the log of the operating time of the equipment, is provided. For each equipment, the operating time values are entered into the system by an authorized employee. The number of operating time types for each object is not limited.

Repair planning

A list of PPR graphs is intended for maintaining the PPR schedules. When entering the PM schedule in the system, you must specify the following basic data:

date of the schedule;

the period for which you need to draw up a schedule;

the organization for which the schedule is being drawn up;

department for which the schedule is drawn up;

a list of repair objects for which it is necessary to draw up a schedule;

a list of types of maintenance and repairs for each repair facility that must be included in the schedule.

For the convenience of the user, the system has the ability to automatically select a group of repair objects.

Operational planning of repair work in the system is carried out in the form of repair requests, which can include only the required materials and operations approved in the specifications and technological maps. When creating requests, the planned costs are automatically determined, and when the progress of repairs is taken into account, materials and labor costs are written off for specific repairs.

An order can be triggered by one of the following events:

Identified equipment defect- in this case, an application for unscheduled repairs will be generated.

The onset of the date of the planned repair according to the PPR schedule- in this case, an application for planned repairs will be generated.

On the basis of the generated repair requests, orders for the execution of repair work are formed. The outfit is issued to the performers (worker, team) before the start of work. The order is filled in automatically based on the information specified in the application and contains the following information:

list of repairs and their technological operations;
turnaround time;
list of maintenance personnel and their qualifications;
prices;
forms of payment.

The accounting of the work performed in the system is carried out through the formation of acts of work performed. The work completion certificate is formed on the basis of the order. After entering and carrying out the act of completed work, the costs of MTO and labor costs can be written off.

Equipment service: Maintenance is understood as work carried out without stopping the equipment, work performed by operating personnel. Usually these are works included in TO 0, maintaining a log of equipment inspections, entering meter readings.
Accounting for equipment inspections: The system provides the ability to automatically generate inspection plans. All defects found during inspections: malfunctions in the operation of the equipment, deviations from the normal state of the equipment, including those that do not require immediate stopping to eliminate them, must be recorded by the operating personnel in the Defect Log.
Calculation of the need for MTO: To determine the need for spare parts, materials and tools for the required period, the system must generate PM schedules for this period. Based on the information about the planned regulatory maintenance and repairs, the system automatically calculates the need for spare parts, materials and tools. Information about the need for MTO is displayed in the report "MTO Plan".
Metrology: service of measuring instruments: All repairs and calibration of measuring instruments are reflected in the system in the same way as described repairs. For keeping records of the values of monitored indicators of equipment, the document "Accounting for monitored indicators" is intended.
Budgeting for repairs and maintenance: The system provides the ability to form budgets for maintenance and repairs and cost accounting. The cost amounts are displayed in the Direct Repair Costs report.
Control of MTO costs: To control the costs of MTO, the report "Plan-fact analysis of MTO costs" is intended.
Labor control: To control labor costs, the report "Plan-fact analysis of labor costs" is intended.
Personnel planning: Information about the planned staffing requirements is displayed in the "Planned Employment of Employees for Repair Work" report. When the system operates as a part of "1C: UPP", all the possibilities of personnel management are available.

Information for accounting

Fixed asset linkage: When the system operates as a part of "1C: UPP", if the object of repair is the main asset, you must indicate this in the system for the possibility of accounting for fixed assets.
Integration with accounting: Documents are transferred to the accounting system to reflect the fact of repairs in accounting.

Unified information environment - the basis of the EAM system

The greatest effect from the use of this software product achieved when integrated with the typical configuration "Control manufacturing enterprise"(" 1C: UPP "). Instructions for integration are given in the book" 1C: MRO User Guide "included in the package.

Below is an integrated system based on "1C: UPP", which shows through which documents are exchanged. It is also seen that the system can receive technological data from process control systems enterprises, thus, data on monitored indicators and operating time will be loaded into the 1C: MRO system in automatic mode.

Document "Internal order"

Internal Order Adjustment Document

Document "Requirement-waybill"

"Production report per shift" document

Document "Piecework"

Document "Receipt of goods and services"

Information protection, administration

The mode contains a list of settings with which you can fine-tune the operation of the program. The changes made are valid for all users registered in the system.

To analyze the effectiveness of repair management in the system, you can use the following reports:

Performance indicator report;
Plan-fact analysis of work performance;
Plan-fact analysis of labor costs;
Plan-fact analysis of MTO costs;
Item costs;
Ongoing analysis of data on the condition of the equipment.

Technological advantages

Using a three-tier platform with a comprehensive enterprise-wide application, the CIO and the enterprise IT department can be confident in the reliability of data storage, performance and scalability of the system. IT specialists receive a convenient tool for implementing the tasks required by the enterprise and maintaining the system created during implementation.

On the 1C: Enterprise 8.2 platform, a client application is implemented - a thin client: it can connect via the http or https protocols, while all business logic is implemented on the server. Remote subdivisions can, using a thin client, connect via the Internet and work with an infobase in on-line mode. Increases safety and speed of work.

On the 1C: Enterprise 8.2 platform, a client application is implemented - a Web client: it does not require any components to be installed on the user's computer, allows you to use it at users' workplaces OS Windows and Linux. Does not require administration on users' computers. Provides quick access to the information base for "mobile" employees.

A special operation mode for client applications has been implemented - a mode of low connection speed (for example, when working via GPRS, dialup). You can work anywhere where there is no permanent Internet connection.

In managed application mode, the interface is not "drawn" but "described". The developer only defines general scheme command interface and general scheme of forms. The platform uses this description when building an interface for a specific user, taking into account various factors:

user rights;
features of a specific implementation;
settings made by the user himself.

It is possible to build an individual interface for each user.

Implemented mechanism functional options... They allow you to enable / disable the necessary functional parts of the configuration without changing the application itself. You can customize the interface for each role, taking into account the preferences of the users.

Scalability and performance

Using the 1C: Enterprise 8.2 platform provides effective work and reliable storage of information for hundreds of users. The modern three-tier architecture of the system allows maintaining high performance with a significant increase in the load on the system and the amount of processed data. High fault tolerance is achieved through redundancy of a cluster of servers, and performance optimization is achieved through dynamic load balancing between clusters. The use of the world leaders' DBMS (MS SQL, IBM DB2, Oracle Database) allows building high-performance and reliable information systems.

Building geographically distributed systems

1C: Enterprise 8 implements a mechanism for managing distributed information bases, which ensures the operation of a single application solution (configuration) with geographically dispersed databases, combined into a multilevel hierarchical structure.

Get up to 50% discount on the PROF version!

1C: MRO Equipment repair and maintenance management- a specialized 1C solution designed for specialists in the organization of repairs and maintenance of industrial equipment, as well as for all divisions of the organization related to repairs, maintenance and asset management.

1C: MRO is suitable for:

Are you a leader or manager enterprises and are responsible for business development: in this case, you will appreciate the various possibilities of analysis, planning and flexible management of enterprise resources, increasing competitiveness. With the help of 1C: MRO, you can control production assets and ensure their "transparency";

Are you a leader or manager departments, or an employee directly involved in production, sales, procurement and other activities to ensure the production process: for you 1C: MRO is a flexible package of professional tools that improve the efficiency of daily work in the field of repair and maintenance;

You are a repair worker: 1C: MRO will allow you to optimize and organize the management of the work process - easily keep an archive of all normative and technical documentation, write out orders for repair work, calculate PM schedules and keep records of repair work;

You are an accounting worker enterprises: you will appreciate 1C: MRO as a convenient tool for automated accounting in full compliance with the requirements of the legislation and corporate standards of the enterprise.

Table # 1 Cost of the 1C program: MRO

VERSIONS OF THE PROGRAM 1C: TOIR 8	COST, RUB
1C: Enterprise 8. MRO Equipment repair and maintenance management	72.000
1C: TOIR Equipment repair and maintenance management. Client license for 1 workplace	11.900
1C: TOIR Equipment repair and maintenance management. Client license for 5 workplaces	54.000
1C: TOIR Equipment repair and maintenance management. Client license for 10 workplaces	96.000
1C: TOIR Equipment repair and maintenance management. Client license for 20 workplaces	156.000
1C: TOIR Equipment repair and maintenance management. Client license for 50 workplaces	324.000
1C: TOIR Equipment repair and maintenance management. Client license for 100 workplaces	480.000
1C: Enterprise 8. MRO Equipment repair and maintenance management 2 CORP	330.000
1C: MRO Equipment repair and maintenance management 2 CORP. Client license for 1 workplace	15.750
1C: MRO Equipment repair and maintenance management 2 CORP. Client license for 5 workplaces	54.000
1C: MRO Equipment repair and maintenance management 2 CORP. Client license for 10 workplaces	103.500
1C: MRO Equipment repair and maintenance management 2 CORP. Client license for 20 workplaces	195.000
1C: MRO Equipment repair and maintenance management 2 CORP. Client license for 50 workplaces	468.000
1C: MRO Equipment repair and maintenance management 2 CORP. Client license for 100 workplaces	900.000

1C: MRO Equipment repair and maintenance management (client license)- single-user version for the automation of individual workstations.

1C: MRO Equipment repair and maintenance KORP 2.0 - analytical system 1C: MRO with additional features for large market players.
It will allow you to create a single information space for an organization or a holding together with other programs on the 1C: Enterprise 8.2 platform.

The features of the electronic delivery of the program are:
... the ability to independently download the solution via the Internet;
... receiving protection keys and licenses by e-mail.

Order access to 1C: MRO for self-acquaintance:

table 2 The main benefits from the implementation of 1C: MRO 8 for all services of the enterprise

SERVICES OF THE ENTERPRISE	PROJECT BENEFITS
Shareholders	control costs, increase asset return, reduce technology risk, optimize inventory, and increase profits through efficient organization.
Technical Services	the order in the accounting in the technical documentation, the issues of the state technical supervision are reduced;
	ease of planning maintenance and repair schedules and works;
	ease of work control;
	simplified control and planning of MRO due to fixed standards;
	financial statements and charts help to effectively formulate requests and speak with financial managers in the same language: numbers, charts and efficiency;
	reducing downtime and waiting for materials to a minimum, competent procurement planning;
	the interconnection with the rest of the services is simplified: financial, accounting, MTO.

Metrology	electronic graphs of equipment checks - simple, fast, convenient.
Department of industrial safety, fire protection, ecology	reduction of technological risks, guarantee of compliance with the requirements of regulatory enactments.
Accounting department	timely document flow in a convenient form, obtaining documents from the right level analysts, reducing the "paper" load.
MTO	timely information on material requirements allows you to plan deliveries. planning will help reduce procurement costs by consolidating batches and reducing the number of rush purchases, and reduce inventory.
Economic services	accuracy and transparency of the budget for repairs and maintenance, the ability to post costs to financial accounting centers.
HR service	the ability to build an optimal personnel motivation system.
IT	decrease in quantity software(often departments use local software), including through the use of one software both for the MRO program for repair management, and for organizing the work of the IT service itself. usually, such software also contains a module for managing it services, in particular a service desk.

Receive free consultation by choosing the version of the 1C: MRO program, taking into account the specifics of the business and the estimated cost of its implementation.

Select the stages of work for your company

Functionality of the program "1C: Enterprise 8. MRO Equipment repair and maintenance management":

Maintaining reference information
Maintain the structure of the enterprise funds in the form of a tree, starting from the enterprise itself, site, workshop, installation, equipment and unit. This type of presentation provides maximum visibility of the entire structure of enterprise assets and a convenient way of working with the system.

Maintenance of equipment passports
The equipment passport contains all the necessary information, including the ability to visualize technical documentation.
The system reflects organizational structure repair services of the enterprise. For example, services chief mechanic, chief power engineer and metrologist. The direct executors of the repairs and their categories are indicated. The availability of labor resources is determined, the entire volume of repair work, as well as the cost labor resources... This information is important for budgeting and monitoring of its execution.

The system provides for the maintenance of standard repairs, work hours schedules, methods of repairs, types of repairs, units of measure (counters), measured indicators, warehouses, manufacturing plants, repair performers, types of defects, condition of equipment, materials.

Formation of a repair schedule
The repair schedule is formed on the basis of a given repair cycle, both for a piece of equipment and for an installation, a site, or an entire enterprise.

Maintaining work orders
All work of the repair service is carried out according to work orders. The outfits are generated automatically, along with all the necessary documentation for the repair. The system allows you to track the progress of work on orders, to take into account the implementation of part of the work. The package of documents includes all applications for materials, which increases the efficiency of management.

Formation of the need for MTO
The solutions automatically generate a report on the need for logistics for the year, a planned schedule, as well as a schedule for each month, with the possibility of adjustment.

1C: Enterprise 8. MRO Equipment repair and maintenance management " - industry solution, created to automate the accounting of repairs and technical maintenance of equipment. The product "1C: MRO Equipment repair and maintenance management 2 CORP" is intended for the organization of the equipment repair and maintenance management system at enterprises of various industries, incl. taking into account the requirements of the ISO 55000 asset management standard.

The main functionality programs

Solution "1C: Enterprise 8. MRO Equipment repair and maintenance management" includes the following main functions:

Reference information maintenance

Allows you to maintain the structure of the enterprise funds in the form of a tree, starting from the enterprise itself, site, workshop, installation, equipment and unit. This type of presentation provides maximum visibility of the entire structure of enterprise assets and a convenient way of working with the system.

Maintenance of equipment passports

The equipment passport contains all the necessary information, including the ability to visualize technical documentation.

The system reflects the organizational structure of the enterprise's repair services. For example, the services of the chief mechanic, chief power engineer and metrologist. The direct executors of the repairs and their categories are indicated. The availability of labor resources is determined for the entire volume of repair work, as well as the cost of labor resources. This information is important for budgeting and monitoring of its execution.

Formation of a repair schedule

The repair schedule is formed on the basis of a given repair cycle, both for a piece of equipment and for an installation, a site, or an entire enterprise.

Maintaining work orders

All work of the repair service is carried out according to work orders. The outfits are generated automatically, along with all the necessary documentation for the repair. The system allows you to track the progress of work on orders, to take into account the implementation of part of the work. The package of documents includes all applications for materials, which increases the efficiency of management.

Formation of the need for MTO

The solutions automatically generate a report on the need for logistics for the year, a planned schedule, as well as a schedule for each month, with the possibility of adjustment.

Optimization of repair costs

When scheduling repairs, equipment downtime for equipment complexes is automatically minimized, thereby reducing the cost of wasted time. Due to the convenience of analyzing the cost of ownership of equipment (purchase price, cost of maintenance and downtime), you can choose the optimal equipment when purchasing. The greatest effect from the use of this software product is achieved when integrated with a typical configuration "1C: Manufacturing Enterprise Management 8". The instructions for integration are given in the book "1C: Enterprise 8. MRO Equipment Repair and Maintenance Management. User's Guide" included in the delivery set.

Cost of software updates tariff Basic :

ITS PROF

ITS Construction

ITS TECHNO

ITS TECHNO DVD subscription for 6 months.	7854 rbl
ITS TECHNO DVD subscription for 12 months.	15036 rbl

ITS. Budget

	8916 rbl
	17112 rbl

ITS. PROF budget

ITS. Budget PROF DVD, 1 month subscription	4818 rbl
ITS. Budget PROF subscription 3 months	9636 rbl
ITS. Budget PROF DVD, 6 months subscription	18600 rbl
ITS. Budget PROF DVD, 12 months subscription	35592 rbl

ITS MEDICINE

Tariff Prof

The cost of updates for this tariff:

ITS PROF

ITS Construction

ITS. Budget

	9 081 rub
ITS. DVD budget, 6 months subscription	17 952 rbl
ITS. DVD budget, 12 months subscription	35 880 rub

ITS MEDICINE

CORP tariff(for non-standard software products)

Updates cost:

ITS PROF

ITS Construction

ITS. Budget-

ITS. DVD budget, 3 months subscription	18 081 rbl
ITS. DVD budget, 6 months subscription	35 952 rbl
ITS. DVD budget, 12 months subscription	RUB 71880

ITS MEDICINE

"1C TOIR Equipment repair and maintenance management"- an industry solution based on 1C Enterprise, designed to automate the accounting of repairs and Maintenance equipment. We can install the 1C MRO program remotely! Article 4601546050229

A powerful contingent of professionals working for you!

1. Own design department. 30 1C programmers are ready to modify the program according to your needs! 2. Service engineers are always ready to leave for current updates. 3. Demonstrators will come and demonstrate the program for free! 4. The head of the office personally supervises the projects!

The solution "1C Enterprise 8. MRO Equipment repair and maintenance management" is intended for:

Chief Mechanic Service,
Chief Power Engineer Service,
Instrumentation,
Metrology Service,
Department of industrial safety, fire protection, ecology,
Department of material and technical support (supply),
Accounting,
APCS.

Solution "1C: MRO Equipment repair and maintenance management" designed to perform the following functions:

Reference information maintenance
1C MRO allows you to maintain the structure of an enterprise's funds in the form of a tree, starting from the enterprise itself, a site, a workshop, an installation, equipment and a unit. This structure provides maximum visibility of the assets of the enterprise and is convenient for working with the system.

Maintenance of equipment passports
The passport of the equipment in the 1C: Enterprise 8 MRO program contains all the necessary information, up to the visualization of those. documentation.
In the system, you can see the structure of all the repair services of the enterprise. For example, services of the chief mechanic, chief power engineer and metrologist. In each event, you can observe the performers of repairs and their ranks. The availability of labor resources is determined for the entire volume of repair work, as well as the cost of labor resources. This information is important for budgeting and monitoring of its execution.

Formation of a repair schedule
The repair schedule is formed on the basis of a given repair cycle, both for a piece of equipment and for an installation, a site, or an entire enterprise.

Optimization of repair costs
When scheduling repairs, equipment downtime for equipment complexes is automatically minimized, thereby reducing the cost of wasted time. Due to the convenience of analyzing the cost of ownership of equipment (purchase price, cost of maintenance and downtime), you can choose the optimal equipment when purchasing. The greatest effect from the use of this software product is achieved when integrated with a typical configuration "1C: Manufacturing Enterprise Management 8". The instructions for integration are given in the book "1C: Enterprise 8. MRO Equipment Repair and Maintenance Management. User's Guide" included in the delivery set.

Use the program "1C: Enterprise 8. MRO Equipment repair and maintenance management" possible only with the 1C: Enterprise platform version 8.1.11 and higher.