Head of the quality control department job description. Typical structure of quality control department

Download job description
Head of Quality Control Department(.doc, 76KB)

I. General Provisions

1. The head of the quality control department belongs to the category of managers.
2. A person with higher professional (technical) education and work experience in the specialty for at least 5 years is appointed to the position of the head of the quality control department.
3. Appointment to the position of the head of the quality control department and release from it is made by order of the director of the enterprise.
4. The head of the quality control department should know:
   1. 4.1. Legislative and normative legal acts, methodological materials on product quality management.
   2. 4.2. The system of state supervision, interdepartmental and departmental control over product quality.
   3. 4.3. Systems, methods and means of technical control over product quality.
   4. 4.4. Systems, methods and means of technical control.
   5. 4.5. Production technology of the company's products.
   6. 4.6. Standards and technical conditions in force in the industry and at the enterprise.
   7. 4.7. The procedure for certification of products (works, services).
   8. 4.8. The order of certification of the quality of industrial products.
   9. 4.9. The procedure for filing and considering claims for the quality of raw materials, materials, semi-finished products, components and finished products.
   10. 4.10. Rules for testing and acceptance of products.
   11. 4.11. Organization of accounting, procedure and timing of reporting on product quality.
   12. 4.12. The experience of leading domestic and foreign enterprises in achieving high levels of product quality and organizing its control.
   13. 4.13. Fundamentals of economics, organization of production, labor and management.
   14. 4.14. Fundamentals of Labor Law.
   15. 4.15. Labor protection rules and regulations.
5. During the absence of the head of the quality control department (vacation, illness, etc.), his duties are performed by a deputy (in the absence of such, a person appointed in accordance with the established procedure), who acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

II. Job responsibilities

Head of Quality Control Department:

1. Organizes work to control the quality of products manufactured by the enterprise, performance of work (services) in accordance with the requirements of standards and technical conditions, approved samples (standards) and technical documentation, terms of supply and contracts, as well as strengthening production discipline, ensuring the production of high-quality and competitive products.
2. Organizes the development of measures to improve the quality of products (works, services), ensuring their compliance with the modern level of development of science and technology, needs domestic market, export requirements, etc.
3. Provides verification of incoming material resources (raw materials, materials, semi-finished products, components), preparation of conclusions on the compliance of their quality with standards and technical conditions.
4. Operational control at all stages production process, control of the quality and completeness of finished products, the quality of tools and technological equipment manufactured at the enterprise, as well as the correct storage in the divisions of the enterprise and in warehouses of raw materials, materials, semi-finished products, components, finished products.
5. Supervises the implementation of measures to improve the quality of products (works, services), preparing them for state attestation and certification, the development and implementation of quality management systems, standards and norms, indicators regulating the quality of products (works, services), the most advanced control methods involving automation and the mechanization of control operations, systems for defect-free delivery of products, non-destructive control, etc., the creation of special means for these purposes.
6. Participates in the work to determine the range of measured parameters and optimal standards for measurement accuracy, to select the necessary means for their implementation, to monitor compliance with the standard terms of product renewal and to prepare it for certification and certification.
7. Organizes random inspections of the quality of finished products, raw materials, materials, semi-finished products, components, quality and condition of technological equipment and tools, production conditions, storage and transportation of products, which are not provided for by the technological process.
8. Provides control over the testing of finished products and the execution of documents certifying the quality of products (works, services), the preparation of complaints in case of violation by suppliers of requirements for the quality of supplies, as well as the timely preparation of methods and technological instructions for the current control of the production process, over the state of control and measuring instruments at the enterprise and the timeliness of their submission for state verification, for the provision of quality control services with the necessary technical documentation.
9. He heads the work on the analysis of complaints, studying the causes of defects and violations of production technology, deterioration in the quality of work, the release of defects and products of reduced grades, on the development of proposals for their elimination, as well as control over the implementation of the necessary measures to increase the responsibility of all production links for the release of products, meeting the established requirements for the termination of acceptance and shipment of low-quality products.
10. Organizes work on the registration of the results of control operations, keeping records of indicators of product quality, marriage and its causes, drawing up periodic reports on the quality of products, work (services) performed.
11. Supervises the employees of the department.

III. Rights

The head of the quality control department has the right to:

1. To act on behalf of the department, to represent the interests of the enterprise in relations with other structural divisions of the enterprise, organizations on the management and control of product quality.
2. Request and receive from managers structural units enterprises and specialists the necessary information.
3. Check the activities of the structural divisions of the enterprise for compliance with the requirements of standards and technical conditions in the production of the enterprise.
4. Interact with heads of all structural units on management and quality control issues.
5. To independently carry out correspondence with the structural divisions of the enterprise as well as other organizations on issues within its competence.

IV. A responsibility

The head of the equipment procurement department is responsible for:

1. For improper performance or non-performance of their job responsibilities stipulated by this job description - within the limits determined by the current labor legislation Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage- within the limits determined by the current labor and civil legislation of the Russian Federation.

• Organizes work to control the quality of the products manufactured by the enterprise, perform work (services) in accordance with the requirements of standards and technical conditions, approved samples (standards) and technical documentation, terms of supply and contracts, as well as to strengthen production discipline, ensure production of high-quality and competitive capable products.
• Organizes the development of measures to improve the quality of products (works, services), ensure their compliance with the current level of development of science and technology, the needs of the domestic market, export requirements, etc.
• Provides verification of incoming material resources (raw materials, materials, semi-finished products, components), preparation of conclusions on the compliance of their quality with standards and technical conditions.
• Operational control at all stages of the production process, control of the quality and completeness of finished products, the quality of tools and technological equipment manufactured at the enterprise, as well as the correct storage of raw materials, materials, semi-finished products, components, finished products in the enterprise's divisions and warehouses.
• Supervises the implementation of measures to improve the quality of products (works, services), preparation for certification, the development and implementation of a quality management system, standards and norms, indicators regulating the quality of products (works, services), the most advanced control methods providing for the automation and mechanization of control operations , systems for defect-free delivery of products, non-destructive control, etc., the creation of special means for these purposes.
• Participates in the work to determine the range of measured parameters and optimal standards for measurement accuracy, to select the necessary means for their implementation, to monitor compliance with the standard terms of product renewal and prepare it for certification.
• Organizes random inspections of the quality of finished products, raw materials, materials, semi-finished products, components, quality and condition of technological equipment and tools, production conditions, storage and transportation of products, which are not foreseen by the technological process.
• Provides control over the testing of finished products and the preparation of documents certifying the quality of products (works, services), the preparation of complaints in case of violation by suppliers of requirements for the quality of supplies, as well as the timely preparation of methods and technological instructions for the current control of the manufacturing process of products, over the state of control and measuring instruments for the enterprise and the timeliness of their provision for state verification, ensuring the technical control service with the necessary technical documentation.
• He heads the work on the analysis of complaints, studying the causes of defects and violations of production technology, deterioration in the quality of work, the release of defects and products of reduced grades, on the development of proposals for their elimination, as well as control over the implementation of the necessary measures to increase the responsibility of all production links for the release of products, meeting the established requirements for the termination of acceptance and shipment of low-quality products.
• Organizes work on keeping records of indicators of product quality, defects and their reasons, drawing up periodic reports on the quality of products, works (services) performed.
• Supervises the employees of the department.

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic check of this document produced at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Head of the technical control department" belongs to the category "Managers".

1.2. Qualification Requirements- complete higher education relevant areas of training (master, specialist). Work experience in technical control- at least 2 years.

1.3. Knows and applies in activities:
- legislative and regulatory legal acts, methodological materials for product quality management;
- system of state supervision, interdepartmental and departmental control over product quality;
- methods of planning to improve product quality;
- systems, methods and means of technical control;
- production technology of the company's products;
- standards and technical conditions in force in the industry and at the enterprise, the procedure for certification of products (works, services);
- the procedure for certification of the quality of industrial products;
- the procedure for filing and considering claims for the quality of raw materials, materials, semi-finished products, components and finished products;
- rules for testing and acceptance of products;
- organization of accounting, procedure and timing of reporting on the quality of products;
- the experience of leading domestic and foreign enterprises in achieving high levels of product quality and organizing its control;
- fundamentals of economics, labor organization, production and management;
- fundamentals of labor legislation;
- funds computing technology, communications and communications.

1.4. The head of the technical control department is appointed and dismissed by order of the organization (enterprise / institution).

1.5. The head of the technical control department reports directly to _ _ _ _ _ _ _ _ _ _.

1.6. The head of the technical control department manages the work of _ _ _ _ _ _ _ _ _ _.

1.7. The head of the technical control department during his absence is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and duties

2.1. Organizes work to control the quality of products that the enterprise produces, to perform work (services) in accordance with the requirements of standards and technical conditions, which are approved by samples (standards) and technical documentation, terms of supply and contracts, as well as to strengthen production discipline, ensure production quality and competitive products.

2.2. Participates in planning to improve the quality of products (works, services) that correspond in their technical and economic indicators to the level of development of science and technology, to the needs of the market; export requirements, etc.

2.3. Provides verification of material resources (raw materials, materials, semi-finished products, components entering production, preparation of conclusions on the compliance of their quality with standards and technical conditions, operational control at all stages of the production process, control of the quality and completeness of finished products, the quality of tools made in production and technological equipment, as well as the correct storage of raw materials, materials, semi-finished products, components in the divisions of the enterprise and in the warehouses of finished products before they are sent to consumers.

2.4. Leads the development and implementation of measures to improve the quality of products (works, services), preparing them for state attestation and certification, the implementation of a quality management system of standards and standards, indicators regulating the quality of products (works, services), the most advanced control methods that provide for mechanization and automation of control operations, systems for defect-free delivery of products, non-destructive testing and others, creating special means for this purpose.

2.5. Participates in the work on determining the range of measured parameters and optimal standards for measurement accuracy, choosing the necessary means for their implementation, monitoring compliance with the standard terms for updating products and preparing them for attestation and certification.

2.6. Organizes random inspections of the quality of finished products and material resources entering the enterprise, the quality and condition of technological equipment and tools, production conditions, packaging, storage, loading and transportation of products, raw materials, materials, semi-finished products, components and tools at the enterprise ...

2.7. Provides control over the testing of finished products and the execution of documents certifying the quality of products (works, services), the preparation of complaints about violations by suppliers of requirements for the quality of supplies, as well as the timely preparation of methods and technological instructions for the current control of the production process, according to the state of control and measuring instruments at the enterprise and the timeliness of their submission for state inspection, for the provision of quality control services with the necessary technical documentation.

2.8. Leads the work on the analysis of complaints, studying the causes of defects and violations of production technology, deterioration in the quality of work, release of defective products and reduced grades, development of proposals for their elimination, as well as monitoring the implementation of the necessary measures to increase the responsibility of all production links for the release of products in accordance with with the established requirements, with the termination of the acceptance and shipment of low-quality products.

2.9. Organizes work on the registration of the results of control operations, accounting for indicators of product quality, defects, its causes and culprits, drawing up periodic reports on the quality of products, work (services) performed.

2.10. Supervises the employees of the department.

2.11. Knows, understands and applies the current regulatory documents concerning his activities.

2.12. Knows and complies with the requirements of regulatory enactments on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The head of the technical control department has the right to take action to prevent and eliminate cases of any violations or inconsistencies.

3.2. The head of the technical control department has the right to receive all social guarantees provided by law.

3.3. The head of the technical control department has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. The head of the technical control department has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of necessary equipment and inventory.

3.5. The head of the technical control department has the right to get acquainted with the draft documents relating to his activities.

3.6. The head of the technical control department has the right to request and receive documents, materials and information necessary for the performance of his official duties and orders of the management.

3.7. The head of the technical control department has the right to improve his professional qualifications.

3.8. The head of the technical control department has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The head of the technical control department has the right to familiarize himself with the documents defining the rights and obligations for the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The head of the technical control department is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. The head of the technical control department is responsible for non-compliance with the internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The head of the technical control department is responsible for the disclosure of information about the organization (enterprise / institution) related to trade secrets.

4.4. The head of the technical control department is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises / institutions) and legal orders of the management.

4.5. The head of the technical control department is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The head of the technical control department is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The head of the technical control department is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

samples of paperwork

V.V. Umnikov

senior supervisor of the technical control department

1. General Provisions

1.1 The senior supervisor of the technical control department of OJSC “Company” reports directly to the head of the technical control department of OJSC “Company” or the head of the technical control bureau, if this position is provided.

1.2 Senior control master is appointed and dismissed by order general director JSC "Company" on the proposal of the Deputy General Director for Quality and Metrology or the Head of Quality Control Department.

1.3 The senior supervisor of the Quality Control Department is a person who has a higher professional (technical) education and work experience in production for at least 1 year or secondary technical education and work experience in the specialty in the relevant profile of the industry enterprise for at least 3 years.

1.4 The senior control master is subject to:

- testers of subordinate units:

1.5 Senior control master in his activities is guided by:

- by decrees government agencies RF;

- the law of the Russian Federation "On technical regulation»;

- The Law of the Russian Federation "On Standardization" No. 5154-1 dated 06/10/93;

- Law of the Russian Federation "On certification of products and services" No. 5151-1 dated 06/10/93;

- Law of the Russian Federation "On ensuring the uniformity of measurements" No. 4871-1 dated 04/27/93;

- the company's policy in the field of quality;

- documentation of the quality management system of the enterprise;

- methodological, regulatory and technical documents and international standards;

- Regulations on Quality Control Department;

- this job description.

1.6 In case of temporary absence, the duties of the senior supervisor are performed by a specialist appointed by the order of the General Director on the proposal of the head of the Quality Control Department.

2 Job responsibilities

The senior control master is obliged to:

2.1 To organize work at the assigned site to control and improve the quality of products, the completeness of manufactured products and accounting for non-conforming products.

2.2 Control the correctness of establishing the type and type of product, its compliance with approved samples (standards), standards, specifications and other regulatory technical documentation.

2.3 Monitor compliance with technological processes at all stages of production, instructions and techniques for technical control at workplaces, the quality of containers and packaging, the technical condition of equipment, storage of raw materials, materials and semi-finished products, components, finished products.

2.4 To supervise the work on the preparation of technical documentation certifying the quality and completeness of manufactured or supplied products (passports, certificates), product certification.

2.5 To monitor compliance with the schedule for checking the accuracy of production equipment and tooling, the state of control and measuring instruments, their availability at workplaces, and timely submission for state inspection.

2.6 Take measures to prevent the production of products that do not meet the established requirements, identify the causes and culprits of nonconformities, and develop and implement measures aimed at improving the quality and competitiveness of products.

2.7 Participate in the development and implementation of the most advanced product quality management systems, control methods, new and revised existing standards, specifications and other regulations and instructions.

2.8 Exercise control over the observance by subordinates of labor protection rules, safety measures, production and labor discipline, internal labor regulations. Conduct periodically briefing on labor protection and safety rules.

2.9 Monitor the delivery of finished products to the warehouse.

2.10 Submit proposals to the head of the Quality Control Department on encouraging employees, as well as bringing to disciplinary responsibility violators of production and labor discipline.

2.11 Promote skills development and professional excellence workers, their training and assignment of ranks, to carry out educational work in a team.

2.12 Participate in production meetings led by supervisors production units enterprises.

2.13 Participate in the preparation and conduct of the "Quality Day" in the shop.

2.14 Timely and accurately execute production orders the general director of the enterprise, production tasks, instructions and orders of the deputy general director for quality and metrology, head of the quality control department.

2.15 Execute labor duties stipulated by this job description and employment contract.

2.16 Observe the internal labor regulations established at the enterprise.

2.17 Not to engage in activities directly or indirectly damaging the interests of the enterprise.

2.18 Know the relevant QMS documentation required for work and comply with its requirements.

2.19 Continuously improve the results of their activities.

3 Professional requirements

The senior control master should know:

- legislative and regulatory legal acts, methodological materials for product quality management;

- technological processes and production modes;

- basic technological and design data of the manufactured products;

- technical and economic requirements for raw materials, materials, semi-finished products, components and finished products;

- standards in force in the industry and at the enterprise, technical conditions, quality indicators, technological instructions;

- systems, means and methods of technical control of production;

- rules for acceptance and storage of finished products, raw materials, materials, semi-finished products, components;

- methods of sampling, the procedure for labeling and packaging of products;

- the procedure for certification of the quality of industrial products;

- types of production inconsistencies, methods of their prevention and elimination;

- rules for testing and acceptance of products;

- the order of registration of technical documentation, certifying the quality of products;

- fundamentals of economics, organization of production, labor and management;

- fundamentals of labor legislation;

- rules and regulations of labor protection;

- the relevant QMS documentation.

Senior control master has the right to:

4.1 Request and receive information necessary for him to perform his job duties from employees of any divisions.

4.2 Decide on disagreements between employees of the Quality Control Department and employees of production units of the enterprise in their assessment of the conformity of products to the requirements established for it.

4.3 Submit to the Deputy General Director for Quality and Metrology - the Head of Quality Control Department proposals on bringing to responsibility officials and workers of the enterprise guilty of manufacturing products that do not meet the established requirements.

4.4 To give production instructions and orders that are binding on subordinate employees of the Quality Control Department.

4.10 Represent the quality control department in various commissions of the enterprise on issues within its competence.

5 Service relationships

The senior supervisor of the technical control department interacts with:

5.1 With the central laboratory for measuring technology:

- provides: applications for high-precision and arbitration measurements and tests. Measuring instruments for verification, according to the schedule, failed before the next verification. Measuring instruments for rechecking or repair;

- receives: test schedules of measuring instruments. Information on the removal from circulation of faulty and not passed deadlines checking measuring devices.

5.2 With workshops and sections:

- provides: conclusion on the conformity of products to the requirements of those. documentation (TU, GOST, drawings, standards, manufacturing technology);

- receives: accompanying technical documentation (drawings, diagrams, standards and manufacturing technology for products).

5.3 With the quality engineer of the technical control department:

- provides: with information about the presented products and detected non-conformities. Acts of non-conformity with an indication of those responsible for the manufacture of non-conforming products. Information about the culture of production;

- receives: information about the return of products for each day. Information on the results of accounting for losses from non-conforming products in the shops under the acts of non-conformity and on the attribution of the amounts to the perpetrators.

The senior control master is responsible in the manner prescribed by the laws of the Russian Federation for:

- failure to fulfill the duties assigned to him, provided for by this job description and the labor agreement (contract);

- incorrect assessment of the quality of products.

Head of Quality Control Department K.K. Correct

Head of the personnel department I.I. Ivanov

Head of the Legal Department S.S. Sergeev

Leading QMS engineer V.V. Vasiliev

Copying materials is allowed only with an active link to the source

Job description of the Quality controller of products and technological process of the 4th category

(the instructions of these employees are carried out only if they do not contradict the instructions of the immediate supervisor).

Substitution:

• Product quality inspector and technological process 4th category replaces.
• He replaces the quality controller of products and technological process of the 4th category.

Reception and dismissal:

The quality controller of products and technological process is appointed and dismissed by the head of the department in agreement with the head of the department. 2. Qualification requirements:

• range of manufactured products
• process parameters
• device, principle of operation of equipment and instrumentation in the serviced area
• sampling rules and methods of analysis
• the influence of the state of equipment on the quality of products
• GOSTs and specifications for raw materials and finished products.

3. Job responsibilities:

• Control over the progress of the technological process in the serviced area according to the results of analyzes and readings of instrumentation.
• Control over the observance of technological regulations by the apparatchiks according to the instruction card.
• Assessment of the technical condition of the operating equipment.
• Control over the timely and correct sampling.
• Participation in the acceptance of equipment after technological stops, cleanings and repairs.

page 1 Job description Product and process quality controller

page 2 Job description Product and process quality controller

The present job description developed in accordance with (name, number and date of the document)

(signature) surname, initials

Head of the legal department:

Job description of the quality control department controller (technical control department) - a document that records the rights and obligations of this employee, as well as the requirements for his qualifications. Let's figure out what such an instruction contains.

The structure of the instruction for the inspector of the quality control department in production

Quality Control Department is a department that is engaged in quality control of products at the enterprise. The tasks of its employees include screening out rejects, reconciling finished products or parts with drawings, requirements of GOSTs or other norms, clarifying the reasons for poor quality and proposing the necessary measures. The controller (or controllers) of the Quality Control Department is engaged in all this.

As in relation to other employees, in order to consolidate the main points regarding work in this position (rights, duties, etc.), an appropriate job description can be introduced at the enterprise. There is no single standard for its development, although in practice a certain template has already been developed, according to which the instruction usually includes 4 parts:

Requirements for qualifications, job duties, rights and responsibilities of the QCD controller

Now let's take a quick look at the content of each section of the job description.

In the first, concerning general provisions, the following information is indicated:

• general description of the position;
• the procedure for the appointment and dismissal of the controller;
• requirements for the qualifications and length of service of the employee;
• regulatory and methodological acts that the controller should know.

The second section is a list job responsibilities of the QCD controller... In particular, it states that he is obliged:

• check the quality of products;
• keep a marriage register;
• participate in the consideration of claims and complaints for the delivered goods.

The section on rights describes the additional rights that the controller is entitled to. For example, it may be said there that he has the right to report to the management about the current situation, give instructions to subordinates, etc.

Job description of the quality controller of product processing

We bring to your attention a typical example of a job description for a quality controller of product processing, a sample of 2017. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of the quality controller of product processing is handed out against a receipt.

The hr-portal website provides typical information about the knowledge that a quality controller for product processing should have. About duties, rights and responsibilities.

This material is included in the huge library of job descriptions on our website, which is updated daily.

1. General Provisions

1. The quality inspector of product processing belongs to the category of workers.

2. A person who has an average professional education or initial vocational education and special training and work experience ________ years.

3. The quality controller of product processing is hired and dismissed by the director of the organization on the proposal of the head of production (site, workshop)

4. The quality controller of product processing must know:

a) special (professional) knowledge by position:

Technical requirements for the quality of processing at all stages of the technological process;

Methods of technical control of processing quality;

Requirements for placing orders accepted for processing; the procedure for returning incorrectly accepted or executed orders to the collection points;

The action of solvents, chemical materials and dyes for products, accessories and finishing materials;

Assortment and labeling of products;

Type and fibrous composition of materials;

Production batch picking rules; technological instructions in force, enterprise standards, republican standards and technical conditions;

Rules for storage and transportation of products;

Types of manufacturing defects, methods of preventing and eliminating them;

The procedure for registration of documentation on the quality of services provided and incorrigible defects;

b) general knowledge of an employee of the organization:

Rules and regulations of labor protection, safety, industrial sanitation and fire protection,

Rules for the use of personal protective equipment;

Requirements for the quality of work (services) performed, for the rational organization of work in the workplace;

Types of marriage and ways to prevent and eliminate it;

5. In his activities, the quality controller of product processing is guided by:

By orders and orders of the director of the organization,

This job description,

The internal labor regulations of the organization,

6. The quality controller of product processing reports directly to a worker with a higher qualification, the head of production (section, workshop) and the director of the organization.

7. During the absence of the quality controller of product processing (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (site, workshop) in the prescribed manner, who acquires the corresponding rights, obligations and is responsible for fulfillment of the duties assigned to him.

2. Responsibilities of the quality controller of product processing

The duties of the quality controller of product processing are:

a) Special (professional) job responsibilities:

Quality control of product processing at various stages of the technological process.

Return to collection points of products accepted without indicating defects or incompleteness of orders.

Checking the correctness of determining the types of technological processing, carrying out preparatory operations and compliance with the rules for completing production batches.

Viewing products and determining the quality of processing in accordance with the current technological instructions, enterprise standards, republican standards and technical specifications.

Selection of products with processing defects and determination of the reasons for the marriage.

Registration of relevant documentation for rejected products, indicating the type and nature of the marriage.

Direction of damaged products for drawing up an act.

Accounting for checked and rejected products.

b) General job responsibilities of an employee of the organization:

Compliance with the Internal Labor Regulations and other local regulations of the organization,

Internal rules and regulations of labor protection, safety, industrial sanitation and fire protection.

Execution within employment contract orders of employees, by whom it was repaired in accordance with this instruction.

Carrying out work on acceptance and delivery of the shift, cleaning and washing, disinfection of serviced equipment and communications, cleaning of the workplace, devices, tools, as well as keeping them in proper condition;

Maintenance of established technical documentation

3. Rights of the quality controller of product processing

The quality controller of product processing has the right to:

1. Submit proposals to the management:

To improve the work related to the envisaged this instruction responsibilities,

On bringing to material and disciplinary responsibility of employees who have violated production and labor discipline.

2. To request from the structural divisions and employees of the organization the information necessary for him to perform his duties.

3. To get acquainted with the documents defining his rights and obligations in the position held, the criteria for assessing the quality of the performance of official duties.

4. To get acquainted with the draft decisions of the organization's management concerning its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and registration established documents required for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the quality controller of product processing

The quality controller of product processing is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

JOB DESCRIPTION

OTK masters

1. GENERAL PROVISIONS

1.1. This job description defines functional responsibilities, rights and responsibility of the master of quality control department "___________" (hereinafter - "Organization").

1.2. The master of quality control department is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the Head of the Organization.

1.3. The QCD Master reports directly to the ________________ Organization.

1.4. A person with ______ professional education and work experience in the specialty of ____ years (without presenting requirements for work experience) is appointed to the position of a foreman of the Quality Control Department.

1.5. Quality control department master should know:

Legislative and normative legal acts, methodological and other materials on product quality management;

Technological processes and production modes;

Basic technological and design data of manufactured products;

Technical and economic requirements for raw materials, materials, semi-finished products, components and finished products;

Standards, technical conditions, quality indicators, technological instructions in force in the industry and at the enterprise;

Systems, means and methods of technical control of production;

Rules for acceptance and storage of finished products, raw materials, materials, semi-finished products, components, sampling methods, the procedure for labeling and packaging products;

Regulations on trademarks and codes;

The procedure for certification of the quality of industrial products;

Types of manufacturing defects, methods of preventing and eliminating them;

Rules for testing and acceptance of products;

The procedure for registration of technical documentation certifying the quality of products (works, services);

Fundamentals of Economics, Labor Organization, Production and Management;

Internal labor regulations;

Fundamentals of Labor Law;

Labor protection rules and regulations.

1.6. During the period of temporary absence of the master of the quality control department, his duties are assigned to ____________.

2. FUNCTIONAL RESPONSIBILITIES

2.1. Quality control department master carries out:

Taking measures to prevent production and prevent the release of products that do not meet the established requirements, identifying the cause and culprits of the marriage, organizing the registration of marriage.

Work on the preparation of technical documentation certifying the quality and completeness of the supplied products (passports, certificates, etc.).

Participation in the delivery of finished products, completed works (services) to customers.

Verification of compliance with instructions and techniques for technical control at workplaces.

Quality control of containers and packages at workplaces, technical condition of equipment and means of transport, storage of raw materials, materials, semi-finished products, components, finished products.

Study and improvement of technology for control of products, materials, components.

Participation in activities related to the introduction of new and revision of existing standards, specifications, regulations, quality indicators and instructions.

3. RIGHTS

The master of quality control department has the right:

3.1. Request and receive the necessary materials and documents related to the activities of the QCD master.

3.2. Enter into relationships with subdivisions of third-party institutions and organizations to resolve operational issues production activities, which is part of the competence of the master of quality control department.

4. LIABILITY

The QCD master is responsible for:

4.1. Failure to ensure the fulfillment of their functional duties.

4.2. Inaccurate information about the status of the work.

4.3. Failure to comply with orders, orders and instructions of the Head of the Organization.

4.4. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the Organization and its employees.

4.5. Failure to ensure compliance with labor discipline.

5. CONDITIONS OF WORK

5.1. The mode of work of the master of the Quality Control Department is determined in accordance with the Internal Labor Regulations established in the Organization.

5.2. In connection with production necessity The QCD master is obliged to go on business trips (including local ones).

I have read the instructions _______________________ / _____________________ (signature)